Chevy Camaro Concept vid - Other Cars Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Chevy Camaro Concept vid
Tuesday, May 16, 2006 9:09 AM
Take note on the chassis. When I saw it on the turntable, I could never take a real good look at its hardware, but the little I saw, looked all feasable. Here it shows it better.
Vid



>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----


Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 9:28 AM
dam it , there should have been a large smokey burn out in that vid , LOL


car looks nice rolling down the road







Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 12:07 PM
sweet... i dont knwo if i want that or a gto damn it..



. member 1244or55
.http://www22.ocn.ne.jp/~cavalier
Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 12:23 PM
That car looks mean coming down the road



Rest In Peace, Saint.
Truth > God
Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 1:14 PM
I was waiting for donuts or at least some WOT the whole time



Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 1:22 PM
I think it looks ugly



Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 1:25 PM
Looks nice, nothing spectacular in my mind. But what is with Steven Kim about eating stuff??

dan



Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 1:49 PM
the more i see this the more i like it




Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 2:18 PM
make it run on E85 and im there dude



1989 Turbo Trans Am #82, 2007 Cobalt SS G85





Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 2:45 PM
damnit! i wanted more exhaust and maybe some tire smoke. i guess that'll have to do, though. it looks a lot better off the showroom floor


Andy

it's not how fast you go, it's how you get there that counts.
ZZP XP cam, 1.6 rockers, 105# springs, speedbuilt FWI, 3.3" modular pulley, TOG headers,
3" exhaust, flomatched injectors
'97 GTP 14.06@100.6mph pre cam w/ 3.5" pulley, I/E
Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 3:01 PM
Loooove it











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 3:06 PM
Inari wrote:I think it looks ugly

x2

There had been some good concept ideas floating around on the web for the last couple of years, as usual, GM picks the worst of them to actually build.



Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 3:07 PM
that interior is awful. it looks like it was taken out of a car from the 60s. if thats the interior it comes to showrooms with, i wouldnt drive it on a bet.





Round 1 Heat v Bulls 4-2 HEAT
Round 2 Heat v Nets 3-1 HEAT

SAC Forums
Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 3:11 PM
SmoothCavi (Brendan) wrote:... it looks like it was taken out of a car from the 60s. ...


uh... that's the point


Andy

it's not how fast you go, it's how you get there that counts.
ZZP XP cam, 1.6 rockers, 105# springs, speedbuilt FWI, 3.3" modular pulley, TOG headers,
3" exhaust, flomatched injectors
'97 GTP 14.06@100.6mph pre cam w/ 3.5" pulley, I/E
Re: Chevy Camaro Concept vid
Tuesday, May 16, 2006 7:52 PM
WORK wrote:
SmoothCavi (Brendan) wrote:... it looks like it was taken out of a car from the 60s. ...


uh... that's the point


hahahahahahaha, no kidding.



"Formerly known as Jammit - JBO member since 1998" JBOM | CSS.net

Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 7:42 AM
That exterior looks just like that new Camaro........ what a coincedence.



Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 8:06 AM
SmoothCavi (Brendan) wrote:that interior is awful. it looks like it was taken out of a car from the 60s. if thats the interior it comes to showrooms with, i wouldnt drive it on a bet.
I don't think anyone buys a Camaro for the luxurious interior styling that they're known for.



Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 9:38 AM
^^^ Exactly, hell, if I had a chance of getting a car that has 400+ horsepower, I wouldn't care if it was a completely bare interior with just a milk crate screwed to the floor, I would still buy it. That and perhaps a nice foam cushion so my rear end doesn't get the checkered pattern indented on it.



Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 10:11 AM
AAAARGGHHH I get 1:06 into the video and it stops grrrrr.





Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 11:15 AM
Alex wrote:^^^ Exactly, hell, if I had a chance of getting a car that has 400+ horsepower, I wouldn't care if it was a completely bare interior with just a milk crate screwed to the floor, I would still buy it. That and perhaps a nice foam cushion so my rear end doesn't get the checkered pattern indented on it.
Pretty much what I always say.

I'd rather take a Blown big block Chevy, gutted and nothing more than the bare essentials to monitor and drive over an interior with real woods, carbon fiber, the finest leathers, and all that other BS.



Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 11:29 AM
SmoothCavi (Brendan) wrote:that interior is awful. it looks like it was taken out of a car from the 60s.


LMFAO!!!

I hate to see the look on you're face if you ever sit in a real musclecar.






Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 1:50 PM
why wont chevy go under already with things like that





Im out there Jerry and Im LOVIN EVERY MINUTE OF IT
Re: Chevy Camaro Concept vid
Wednesday, May 17, 2006 1:52 PM
yenkosuprcar wrote:
SmoothCavi (Brendan) wrote:that interior is awful. it looks like it was taken out of a car from the 60s.


LMFAO!!!

I hate to see the look on you're face if you ever sit in a real musclecar.
*What the @!#$?!?! Bench seats?!?!?*



Re: Chevy Camaro Concept vid
Thursday, May 18, 2006 7:36 AM
^^^^^^^^ Ha Ha



Re: Chevy Camaro Concept vid
Thursday, May 18, 2006 8:36 PM
[quote=TRD 901-Z™]sweet... i dont knwo if i want that or a gto damn it..

exactly the same complex that im having right now....




** FOR SALE** http://www.j-body.org/forums/read.php?f=24&i=110879&t=110879
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search