Trunk enclosures request.. not FG - Audio & Electronics Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Trunk enclosures request.. not FG
Friday, February 24, 2006 6:24 AM
Hey guys/girls.. As some of you saw, I recently posted pics of my new audio that I just purchased.

I want to create a trunk setup, with possibly a false floor/plexiglass type idea. I've searched and found a lot of matches, but nothing really what im looking for. I want a factory looking feel to it, with vinyl, carpet, etc. No Fiberglass, but feel free to post anyways.

Im finally getting out of the whole 2 subs in a box with an amp on the back of the seat idea, but im having a hard time figureing out what I want.. Im not going to be copying anyone, I just want ideas.

Even if you can provide links of a good spot to get ideas, anything helps.. im stumped. Im not sure how long this thread will last, but hopefully you guys can help me out. I remember seeing a Huge post with everyone posting pics, but cant find it



Official Member of Ontario Cavs/J-Body Club of Ontario

Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 6:58 AM
What about doing two separate boxes on each side of the trunk?? That's what I was planning awhile ago so I could still have some usable trunk space

Only stuff I've had in the Cav yet has been the simple box w/ the amp on the floor So no pics from me, heh.




F/S: 2005 KAWASAKI ZX-6R 636, METALLIC BLUE, 114x MILES, $7500 OBO
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 7:00 AM
No I dont want boxes... I want it built into the car.. almost a factory look, but with a nicer touch.



Official Member of Ontario Cavs/J-Body Club of Ontario
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 7:09 AM
What I'm saying is to make the walls the subs and of course cover it with matching vinyl or even carpet. IMO, raised floor w/ plexi isn't factory.




F/S: 2005 KAWASAKI ZX-6R 636, METALLIC BLUE, 114x MILES, $7500 OBO
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 7:41 AM
Here is my trunk setup I had done at great scott in norwich CT, 2 12" JLW3, reverse firing, 1 Alpine V12 550x1 powering the subs, and 1 Alpine V12 500x4 powering the Polk Momo interiors. In the middle is a black lexan chevy symbal sunken in white vinyl under plexiglass, theres two blue neons next to the strut tower bar, and two smaller neons on each side of the chevy symbal, both hidden. The carpet matches the stock trunk carpet perfectly. Hope this is close to what you were looking for.

and heres a closer look at the chevy symbal under plexiglass, the neons you see are a reflection of the ones hidden by the strut bar, you cant see any of the neons inside.

Oh and sorry for the spots on the first picture, it was snowing out and it was getting on my lense.



Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 7:46 AM
you could always do a hidden design like the JL audo stealth boxes... i had one in my s-10 that was nice!



Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 8:06 AM
Carbon!! Yes thats the ideas im looking for. You get what I meant by factory style. everything matches the stock colors, and it looks like it could have come like that.

Looks good man. thanks, keep em comming!



Official Member of Ontario Cavs/J-Body Club of Ontario
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 8:19 AM

I "borrowed" this pic from " AgentOmega " incase he doesn't see this thread...








"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 8:21 AM
^ That's sorta what I was talkin' about for putting the sub in the walls But maybe make it extend the length of the trunk, up to the back seat, so it's all flat




F/S: 2005 KAWASAKI ZX-6R 636, METALLIC BLUE, 114x MILES, $7500 OBO
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 8:40 AM
Thanks, I pretty much told them heres how much im spending, do whatever you want i dont care. lol and thats what they came up with, they said we only have one question, do you vacum your trunk, i said no, he said ok, then they showed me this. They told me we could have done the whole thing in white vinyl and made it really stick out but since you dont clean your trunk then a factory look was the way to go in this situation. I think this is better IMO to keep it looking factory yet a whole trunk setup really catches the eye. Goodluck on getting yours done and hope to see it when finished.



Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 10:37 AM
check mine out.. these pics at the bottom of my cardomain, are taken before it was colverd with carpet and painted inside..
i'll get some updated pics up soon..


http://www.cardomain.com/ride/574318

car domain page




Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 7:08 PM



im building an amp rack out of copper piping to sit infront of the box, it will be painted orange as well



Insert Funny Saying Here
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 8:05 PM
Here's what I built. I know you said you have 2 subs, but this could get an idea sparked for ya. I did this to save space in the trunk, because my car is the baby hauler, so the stroller goes in....




This is a close up of the plexi that I made...


I know...I still have to finish around the amp...not bad for $15 for the wood and $5 for the glue, huh?




Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 8:17 PM
ah yes baby hauler..my car was that once til my ex left me..... u try getting 2 babyseats + 2 babies in a car with non sliding racing seats hahaahah



Insert Funny Saying Here
Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 9:31 PM
Summit Cavi's..... 2 screens...






www.teamexoticimage.com / myspace.com/02on19s


Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 10:35 PM
sealed box, floating amps, and a neon underbody kit hidded inside the trunk









Re: Trunk enclosures request.. not FG
Friday, February 24, 2006 11:14 PM
02on19s wrote:Summit Cavi's..... 2 screens...



Must....have....THIS SETUP! i doth foundith the answer to all my problems. Do you know how i can contact him? Id like to know how he did it.



Re: Trunk enclosures request.. not FG
Saturday, February 25, 2006 12:32 AM
dougall wrote:

im building an amp rack out of copper piping to sit infront of the box, it will be painted orange as well


Naw mang!! Polish that copper IMO, polished would look better than painted.




F/S: 2005 KAWASAKI ZX-6R 636, METALLIC BLUE, 114x MILES, $7500 OBO
Re: Trunk enclosures request.. not FG
Sunday, February 26, 2006 4:03 PM
looking good ! Any more?



Official Member of Ontario Cavs/J-Body Club of Ontario
Re: Trunk enclosures request.. not FG
Sunday, February 26, 2006 8:42 PM
i think you missunderstand the term "fiberglass". just because its fiberglass, doesnt mean it has to be painted. it can be finished in all the same ways as wood.

mine will be done in a few weeks (hopefully), same idea to what your thinking, sub on the side, amp rack in spare tire well, and changer on oppisite side of the trunk from the sub. oh, and it will be mostly fiberglass, but the majority of it will be covered in trunk liner but will still have some flash when done


-------------

Re: Trunk enclosures request.. not FG
Sunday, February 26, 2006 10:37 PM
Gary, you totally made my day just now! Lol...

I made that box the way I did b/c I take my car on trips and wanted a fully-functional trunk. Seeing some nice setups on hear, though!







Re: Trunk enclosures request.. not FG
Tuesday, February 28, 2006 10:32 AM
Ya I meant no FG, beause im not doing FG at all, so I dont want to see ideas that I cant use lol.

FG is time consuming, and in the end, doesnt produce the sound that a proper box will (as far as I know)



Official Member of Ontario Cavs/J-Body Club of Ontario
Re: Trunk enclosures request.. not FG
Tuesday, February 28, 2006 4:15 PM
STYLEZ24 wrote:Ya I meant no FG, beause im not doing FG at all, so I dont want to see ideas that I cant use lol.

FG is time consuming, and in the end, doesnt produce the sound that a proper box will (as far as I know)

I fiberglass all my boxes...at least from the INSIDE.


--------------------------------------------------------------
Offical dealer for the following-

SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW

Re: Trunk enclosures request.. not FG
Tuesday, February 28, 2006 6:19 PM
Smooth inside = more spl. I'm doing round corners, fiberglassed port and inside.



Re: Trunk enclosures request.. not FG
Wednesday, March 01, 2006 8:32 AM
STYLEZ24 wrote:Im finally getting out of the whole 2 subs in a box with an amp on the back of the seat idea


Hey now, some of us have regressed back to this state...




__________________________________________________________________
Performance cars do not win car shows and show cars do not win races.
It's up to you to decide which you'd rather win.


Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search