Imy car is a 4spd auto, and i was wondering if there was a way to change the car, either throuhg transmission or the engine to get it to cruise at about 70mph at 2k rpm. that would be awesome, thank you.
Are you trying to shift your powerband upwards? What exactly is your goal?
Your car cruising higher than 2k has to deal with your transmission and I believe your gearing.
www.kronosperformance.com / 732-742-8837
regearing the trans is the only way to do that
powerband of the engine... yes.... various mods....
gear ratios.... all internal on the transmission and or torque converter...
cams and intake and exhaust will change it to
The one, the only, ME.
cams and intake will make you rev faster and accelerate quicker, but won't make you run 70mph at a lower rpm
15.891 @ 88 mph stock, still getting @!#$ty launches...
it will shift the power band higher or lower but i now see what he is talking about
shouldve worded the topic different haha. smaller tires will help it run higher rpms
The one, the only, ME.
simply sounds like he should get a manual and use 5th gear to cruise at higher speeds...
bah down with the 5 spd lol
The one, the only, ME.
Both the 97' auto and 04-05 eco's run at 3K rpms at 80 mph. Give or take a couple mph
My Car
Dirty Muffins (Event) wrote:simply sounds like he should get a manual and use 5th gear to cruise at higher speeds...
Exactly my thoughts
www.kronosperformance.com / 732-742-8837
Hey, speaking of cams, does anyone make them for an auto 2200?
RandomGuy 171 wrote:Hey, speaking of cams, does anyone make them for an auto 2200?
First remember, the 2200 has 1 camshaft.
Contact
Jbody Performance
www.kronosperformance.com / 732-742-8837
ws6+04cav= FTW wrote:Imy car is a 4spd auto, and i was wondering if there was a way to change the car, either throuhg transmission or the engine to get it to cruise at about 70mph at 2k rpm. that would be awesome, thank you.
the only way to correctly answer his question , is change the final drive ratio
the trans has a final drive of 3.89(if i remember correctyl) , he would need to change to a 3.4 to drop the cruise rpm to that range
but no one offer any gears for the 4t40/45 , atleast that i know of
put on 26" rims
sig not found
