My cruise was working fine about a month ago. I swapped in a new motor a few weeks ago, hooked up the cruise, and now it doesn't work. I push the button for cruise, and nothing happens.
The VSS is hooked up, and I checked the clutch switch, which seems to be working.
I checked the fuse for the cruise in the fuse panel on the drivers side, and the fuse is fine.
Anything else I forgot to check? Does anyone know of any troubleshooting for the cruise module? Thanks!
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
Do the brake lights work? The cruise is also wired through the BOO switch. Which is why when you apply the brakes the cruise shuts off.
- 2004 Cavalier - 124k, owned since new
Yeah, brake lights work also. I'm at a loss.....
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
its pretty possible that ur switch on ur steering column is burnt out.. do u ever have a problem with ur headlights coming on properly at all?
Can we assume there are no CEL codes? Some OBDII codes can disable systems, for example a faulty throttle or pedal position sensor can disable cruise on some vehicles.
No CEL codes at all.
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
Well, I figured it out. I looked at the clutch again, and turns out there are 2 clutch position sensors. One in front and one in back. I didn't notice the back one before. Turns out, it unscrewed far enough so that the button wasn't being pushed in. Screwed it in farther and it works! Thanks for the replies.
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
