I was just wondering what normal transmisson temp is on our transmissons
and what temps people are running with a yank 3000 stall?
its a 96 Z24 by the way
thanks
8 psi with m62 and IAT under 100
bump
8 psi with m62 and IAT under 100
please anyone lol
8 psi with m62 and IAT under 100
You don't want to see much over 200 or 220, ever!
alright thank you ill have to see later this week when my car is running again
8 psi with m62 and IAT under 100
Mine doesnt go over 185 under normal driving, it is at about 200 at the end of the track when I race tho.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Do you have a transmission cooler? That seems a but on the high side, still safe though. As a rule of thumb you shouldn't be over 80 degrees above ambient temperature (75 outside + 80 = 155 maxish).
^Yes I have a tranny cooler. I may be a little high on the trans temp at the track(could be a guess) but I know its not above 200. I havent driven the car since last Aug.
Thanks for the rule of thumb, never knew that.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
You should be fine, just keep an eye on it.
I posted about this a long time ago....
Click Here....
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
wow thanks guy this helps alot does that rule of thumb go out the door with a 3000 stall?
8 psi with m62 and IAT under 100
It would be a little bit higher than stock. Was is the stock stall, 2500 (sorry, I don't have an auto)?
Mine was about the same with or without my Yank High Stall.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
ok thank you
8 psi with m62 and IAT under 100
