Hi,

I'm going to attempt installing an alarm in a '93 Chevy Cavalier 2-door coupe. This vehicle has never had any previous security system work done before. I know nothing about Cavaliers other than what engine this one has.

How difficult is it to install an alarm in one of them?

It would be great if I can get links to locations and diagrams of the necessary wires for this install, such as the door pins, brake light, side marker, ignition, and horn.

Thanks in advance.

Constant 12V+ Red Ignition Switch Harness
Starter Yellow Ignition Switch Harness
Ignition Pink Ignition Switch Harness
Accessory Orange Ignition Switch Harness
Tach White In Harness Behind Engine
Neutral Safety Wire Orange/Black Gear Select Switch
Brake Switch White Brake Switch
Trunk Release Black Switch
Trunk Pin Black/Orange (-) Gate Ajar Switch (Wagon only)
Parking Lights Brown Light Switch
Head Lamp Tan (Low Beam) Green (Hi Beam (+)Head Light Switch
Hood Pin n/a
Factory Disarm n/a
Door Trigger White (-) Driver's Pin Switch
Door Lock Light Blue Driver's Kick Panel
Door Unlock Black Positive Trigger
Horn Wire Black (-) Steering Column
Windows Up LF=Blue, RF=Blue/White,
Windows Down LF=Brown, RF=Tan



---------------------------------------------------------------
Sponsored by:
JLCaudio.net