2.3 Intake manifold - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
2.3 Intake manifold
Friday, April 22, 2005 2:26 PM
I know there are lots of posts about this but I believe this might be an informative one. I've been wanting to get this manifold for some time and just decided to go to the junk yard too look for one. I couldn't remember what the Vin # of the vehicle it was suppose to come off of was but Vin D stuck out in my head. I found quite a few vin D's and decided to pull one not realizing this is the wrong vehicle. I get home and check to see if I pulled the right one. At this point I'm kicking myself because Vin D vehicles have the LO manifold. I run out to check the part number on the manifold and it ends up being the HO manifold. Not sure how or why. I like to think I got lucky. Maybe there are more of these manifolds on Vin D vehicles. The car was a 91 Grand Am.

Re: 2.3 Intake manifold
Friday, April 22, 2005 8:33 PM
Vin D is for the secret exhaust cam SO GO BACK AND GET THAT TOO,lol, as long as you have the large plenum that doesnt shrink in size you have the HO mani, good luck, I love mine.



Re: 2.3 Intake manifold
Monday, April 25, 2005 12:34 AM
for some reason, only pontiac cars with the LD2 used the HO manifold.



Click the banner to enter the best Quad4 & Twin Cam site on the internet.
Re: 2.3 Intake manifold
Monday, April 25, 2005 5:03 AM
Does the '95 Sunfire GT have the ho manifold?
Re: 2.3 Intake manifold
Monday, April 25, 2005 5:08 AM
never mind..... its the LO
Re: 2.3 Intake manifold
Monday, April 25, 2005 4:21 PM
yea its the LO, but from what i understand all pontiacs besides 1995 cars with the LD2 have the ho manifold. sorry i should have been more clear.



Click the banner to enter the best Quad4 & Twin Cam site on the internet.
Re: 2.3 Intake manifold
Monday, April 25, 2005 8:20 PM
that's good to know. There are two more of those manifolds sitting there in the junk yard. Maybe I'll have to pull them and try to sell them. Yeah, I already have a set of those cams bought. Otherwise I'd be out there pulling them too.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search