How many would be interested in TRD headlight cover replicas? They will be made of fiberglass and not the cheap autozone crap I add additives so the part is not weak and some what bendable.
If interest is low I will toss the idea out
Made from 00-02 headlamps not sure if they fit 95-99 if some one can clarify that would be awesome, I don't see why not tho as the only difference is the bottom of the head lights to my knowledge.
The one in the pic is not 100% trimmed or sanded
- Attachments
- IMG_20140805_103807_586.jpg (1190k)
Will not fit 95-99 headlights. they are close, but dot the same.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Wonder what I would need to do to make em fit 95-99.
What's different about em?
I'm eco I no nuffing on this lol
Blue Boosted Penguin wrote:Wonder what I would need to do to make em fit 95-99.
What's different about em?
The way the corner lights match up is different. The corner lights on the 95-99 are shorter. Also, the match up between the lens and the housing is slightly different. These could probably work depending on how you mount them. If you're using double sided tape or hook-and-loop (HD Velcro), it'll probably work.
Its gonna be double sided tape but I have it to where the inside corners clip on to the housing as of now will need double sided to hold it down on the corner lights tho
Mr. Quick wrote:Blue Boosted Penguin wrote:Wonder what I would need to do to make em fit 95-99.
What's different about em?
The way the corner lights match up is different. The corner lights on the 95-99 are shorter. Also, the match up between the lens and the housing is slightly different. These could probably work depending on how you mount them. If you're using double sided tape or hook-and-loop (HD Velcro), it'll probably work.
Possibly interested once I see final product..
Dante_k_late wrote:Possibly interested once I see final product..
Probably just gonna sale the prototype.
Sense like every other j feeler there's interest and when time comes no one is to be found........
whats the price looking like?
interested.
On the inside my car looks like a fighter jet.
Project went up on the shelf due to lack of interes.
There were a group of 10 on jbi was quoting em at $75 a set. If I make singles $100. Have two more projects to finish up before I start on these again....
