Ok I said I was gonna leave this alone till i saw they have done it again to some unlucky person


original post got locked not sure why since its a major issue

http://www.j-body.org/forums/read.p...339280&t=339280

a new post where he says yet again its not their fault

http://www.j-body.com/community/showthread.php?t=16946&page=1&pp=10

wbscav wrote: We would not waist a customers time

that part of the qoute just makes me laugh

wbscav wrote: We had 1 complaint in the past about fitting and we fixed everything after that

then i read this, I have seen pictures and the hoods up close of most of the ones that are on cars, sorry to those who have them but they are all done very very poorly just nobody has said anything. Maybe people have different standards but everyone I have seen the lines on the hood too many times and after I had one and picked it apart I've noticed everyone is the same, I told you the issues yet you have done **** all about it. I did a photo shop from the actual picture your even showing off lmao

Hood contour line highlighted in white you can also see how Jays is lower on the driver side right by the headlight yet fits fine near the middle also the wave in the passenger side as I have told you 500 times and had a 3 month battle over you with.





not only Jays but Adams as well I mean both great cars but thats a total flaw as well as the bad fitment on all of them



Factory as you can see on my car both curve in not one out one in lmao

wow another thread i guess the 15 pages of the last one wasnt enough

I have not been following any of the threads you mention so forgive me if I am off.

It's my understanding that those hoods are really cheap. What do you want from a cheap part?

neither of your links work for me. the first one is missed up (it autopruned the address and screwed it up) the second one you have to be a forum member on j-body.com to view (which i am not).


i like how their down to selling only like 5 products now.




5 YEAR ANNIVERSARY FREEBIE GIVEAWAY - CLICK HERE TO ENTER
What you know about Street Racing anyways? Only what Fast & Furious taught us....
SO EVERYTHING!

shocking....Whiteboy and @!#$ty products?? i cant believe it.

/sarcasm





Built Not Bought

I chuckle when I come across his ebay ads

the descriptions are pretty funny.... its like hes trying to sell a polished turd

im not sure what you are saying in this post. are you just saying that the curved part on the sides are messed up on the invader hood? because in your pics you really cant tell whether they are or not because a)the pics arent straight on and b)the reflection covers up most of the curves anyway.

you should ask jayfire post up some straight on pics and see what his personal opinion is.

White Boy wrote:i have a big penis, big car, and a big house and i'm living my life, while your still living with your mom and driving a cavalier. No matter what publicity, it is publicity and when you grow up you will learn. Our sales have never been higher so keep talking.. lets go for 24 pages.

Again.... thats just great....



Edited 1 time(s). Last edited Wednesday, September 26, 2007 10:37 AM

BuMmRz wrote:Ok I said I was gonna leave this alone till i saw they have done it again to some unlucky person

Factory as you can see on my car both curve in not one out one in lmao

I was not going to post on here but then I noticed this thread.

Look at that gap between the bumper and the hood, looks like your factory hood is not fitting to well.

And I also am not sure what you are trying to say about these hoods but come on I think they look sweet in those pictures does anyone else agree?

I was not going to post on here but then I noticed this thread.

Look at that gap between the bumper and the hood, looks like your factory hood is not fitting to well.

And I also am not sure what you are trying to say about these hoods but come on I think they look sweet in those pictures does anyone else agree?



That gap appears to be from the bumper, but nonetheless, the gap is consistent, and symmetrical even.

How about we shut this goddamn thread down and let it die forever?

White Boy wrote:

BuMmRz wrote:Ok I said I was gonna leave this alone till i saw they have done it again to some unlucky person

Factory as you can see on my car both curve in not one out one in lmao

I was not going to post on here but then I noticed this thread.

Look at that gap between the bumper and the hood, looks like your factory hood is not fitting to well.

And I also am not sure what you are trying to say about these hoods but come on I think they look sweet in those pictures does anyone else agree?

, i'd take the factory hood in ^ pic before i'd LOOK at the invader you sell!!






http://www.myspace.com/fpsunfire
5 seconds to find another street...

89Sunbird wrote:How about we shut this goddamn thread down and let it die forever?

Why? Its a legit complaint, and its a warning for anyone who wants to go through Whiteboy. Whenever someone has a good transaction and they post it, no one has ANY problems whatsoever cause the companies are getting good rep. Yet, as soon as someone has a negative thing to say, god forbid its a war and the topics get locked and thats crap. Why should someone else get screwed over that doesn't know whats going on with these hoods?

Exodus 259 wrote:

89Sunbird wrote:How about we shut this goddamn thread down and let it die forever?

Why? Its a legit complaint, and its a warning for anyone who wants to go through Whiteboy. Whenever someone has a good transaction and they post it, no one has ANY problems whatsoever cause the companies are getting good rep. Yet, as soon as someone has a negative thing to say, god forbid its a war and the topics get locked and thats crap. Why should someone else get screwed over that doesn't know whats going on with these hoods?

couldnt agree more these threads should be left open, my sig says it all and the post it goes too says it all. hey whiteboy any luck selling the molds or did you finally realize nobody would pay money for what you got

neongreencavi wrote:

Exodus 259 wrote:

89Sunbird wrote:How about we shut this goddamn thread down and let it die forever?

Why? Its a legit complaint, and its a warning for anyone who wants to go through Whiteboy. Whenever someone has a good transaction and they post it, no one has ANY problems whatsoever cause the companies are getting good rep. Yet, as soon as someone has a negative thing to say, god forbid its a war and the topics get locked and thats crap. Why should someone else get screwed over that doesn't know whats going on with these hoods?

couldnt agree more these threads should be left open, my sig says it all and the post it goes too says it all. hey whiteboy any luck selling the molds or did you finally realize nobody would pay money for what you got

yah your sig a few months back got me to read the thread on the last go around... thats why i quoted it... thats one of those statements that follows ya around (if youre the one who made it)...

additionally...

i did not remove the link to Whiteboy's site when i redid the FAQ... because it would showing biasism to the company to remove it. I also did not add any remarks about sales, for 1) i didnt for any other company, and for 2) it would be slander being that its in a FAQ that will eventually be stickied. so posts like these are good, because thats the way the end consumer will see the quality of both a company's product, and a company's customer service.



Edited 1 time(s). Last edited Wednesday, September 26, 2007 1:44 PM

I agree, good knowledge and should be left open. Why should everyone get ripped?


2004 LS Cavy - everyday driver

http://temp.corvetteforum.net/c4/snakecharmer

www.myspace.com/streetdreamscarclub

White Boy wrote:

BuMmRz wrote:Ok I said I was gonna leave this alone till i saw they have done it again to some unlucky person

Factory as you can see on my car both curve in not one out one in lmao

I was not going to post on here but then I noticed this thread.

Look at that gap between the bumper and the hood, looks like your factory hood is not fitting to well.

And I also am not sure what you are trying to say about these hoods but come on I think they look sweet in those pictures does anyone else agree?

thats your reply? its pretty easy to see the hood is fine and the bumper is lower. allot of pictures on the net look sweet on the net but horrible in person. i can make my cock look 2' long with a picture but it aint that way in real life.


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography

sndsgood wrote:

White Boy wrote:

BuMmRz wrote:Ok I said I was gonna leave this alone till i saw they have done it again to some unlucky person

Factory as you can see on my car both curve in not one out one in lmao

I was not going to post on here but then I noticed this thread.

Look at that gap between the bumper and the hood, looks like your factory hood is not fitting to well.

And I also am not sure what you are trying to say about these hoods but come on I think they look sweet in those pictures does anyone else agree?

thats your reply? its pretty easy to see the hood is fine and the bumper is lower. allot of pictures on the net look sweet on the net but horrible in person. i can make my cock look 2' long with a picture but it aint that way in real life.

2' jesus thats classic, why stop at 2 feet

neongreencavi wrote:

sndsgood wrote:

White Boy wrote:

BuMmRz wrote:Ok I said I was gonna leave this alone till i saw they have done it again to some unlucky person

Factory as you can see on my car both curve in not one out one in lmao

-Image-

I was not going to post on here but then I noticed this thread.

Look at that gap between the bumper and the hood, looks like your factory hood is not fitting to well.

And I also am not sure what you are trying to say about these hoods but come on I think they look sweet in those pictures does anyone else agree?

thats your reply? its pretty easy to see the hood is fine and the bumper is lower. allot of pictures on the net look sweet on the net but horrible in person. i can make my cock look 2' long with a picture but it aint that way in real life.

2' jesus thats classic, why stop at 2 feet

yeah 2 feet isnt long enough... remember... he said he has a big penis =P

BoltZ22 wrote:neither of your links work for me. the first one is missed up (it autopruned the address and screwed it up) the second one you have to be a forum member on j-body.com to view (which i am not).


i like how their down to selling only like 5 products now.

Here's the pics from that thread:

Quote:








yea it was bought brand new...bodywork isnt gunna help any ... i bought it sumtime earlier this yr just finally decided to show there quality or w/e ..... hopefully now they have had sumone the has debugged there @!#$ty molds or do sum inspection on there products or sumthing





day after picked it up

Later in that thread:

Quote:

if u want call me a lier i have not damaged my hood in any way shape or form its only been off my car once since being installed which was like in june when getting my motor rebuilt .... oh there is more forgot there is more to the story, forgot bout the birds using it as a bird bath after it rains

i guess i don't understand what you're talking about with one side curves in and the other curves out.

perhaps if you could post pictures that actually showed details (stright on shots, similar pictures of each side for comparison, etc) then you'd be making a valid point. showing one side of a hood at one angle, then the other side at a completely different angle makes it hard to see differences.

im not sticking up for whiteboy at all, but your "proof" is lacking considerably.

White Boy wrote:

BuMmRz wrote:


I was not going to post on here but then I noticed this thread.

Look at that gap between the bumper and the hood, looks like your factory hood is not fitting to well.

And I also am not sure what you are trying to say about these hoods but come on I think they look sweet in those pictures does anyone else agree?

good business ethics, we have bad comments so lets complain back. Maybe next time make sure the BUMPER is actually mounted on properly not just a snap shot of the new hood paint before its all put together lmao

also Canon I unsderstand what your talking about and unless someone can get me a head on shot I wont be able to show it perfectly. I will work on getting someoen to take a picture of it but everyone has the same issue, and I have an email stating it was all fixed.

Exodus 259 wrote:

89Sunbird wrote:How about we shut this goddamn thread down and let it die forever?

Why? Its a legit complaint, and its a warning for anyone who wants to go through Whiteboy. Whenever someone has a good transaction and they post it, no one has ANY problems whatsoever cause the companies are getting good rep. Yet, as soon as someone has a negative thing to say, god forbid its a war and the topics get locked and thats crap. Why should someone else get screwed over that doesn't know whats going on with these hoods?

seriously i wonder if you ever read threads on these forums. theres plenty of time in the general forum where people dont feel like hearing about what good all these companies are. almost every week you see a thread about aplus and turbotech or gravana, its just as annoying as these types of threads.

if you havent noticed there was a huge 15 page thread about whiteboy. oh nm, no one ever searchs so i guess it wont be found.

^ ^ ^ actually its somewhat linked to on the first post of this thread....

but this is a new complaint...

basicly he is trying to point out that on the passenger side of the hood aboot midway or so the hood dips well below the fenderline whereas on the driver's side the hood sticks up above the fenderline at aboot the 1/3 way back point.

it is not even along the sides and appears that the hood is torqued in opposite directions.