03 trunk on 98 / 00 bumper on 98 questions. - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
03 trunk on 98 / 00 bumper on 98 questions.
Tuesday, September 26, 2006 10:01 AM
Alright, I read through the entireExterior FAQ thread and didn't see it so, how would I go about putting 03-05 tail lights on my 98? I'm mostly concerned about the middle panel, would it just intall onto the trunk or does it have to be molded into the trunk? Would it be easier to just get an 03-05 trunk?

Also did I read that right? You can't put an 00+ rear bumper from a bodykit (wings west) on a 98? Or any 00+ bumper at all for that matter?
Thanks.




Re: 03 trunk on 98 / 00 bumper on 98 questions.
Tuesday, September 26, 2006 10:32 AM
for the trunk... youd just need to drill the holes from the tail panel across the trunk onto your trunk...or you could clip the bolt points, and just bolt it where your styock tails are

as for rear bumpers, all 95-05 cav bumpers are interchangale, so any will work
only difference is the tail fillers.






Re: 03 trunk on 98 / 00 bumper on 98 questions.
Tuesday, September 26, 2006 8:31 PM
Is the center of the 03+ tails actually indented in their trunks? Meaning will it stick out on my 98 trunk?

And I ask about the bumper because it says in the Ext. FAQ that there are 3 different bumpers, 95-99, 00-02, 03-05, what do you mean by tail fillers, those square panels under the tail lights?



Re: 03 trunk on 98 / 00 bumper on 98 questions.
Tuesday, September 26, 2006 8:40 PM
there is no extra indentions



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search