Searched but couldnt find anything, i got some of those new clear black headlights found on
eBay and i installed them, they look fine its just that they are aimed at the ground and i cant seem to adjust them at all with the supplied adjusters. Anyone else have these lights that could give me some help, or how would i go about swapping out the stock adjusters if it could possibly help me out. The headlights are a nice temperary fill while i work on putting projectors in the stock housings.
Thanks!
I do not know, but they look way to much like my stock lights. Have you tried contacting the person that you bought them from?
diy and get the clear parts from Jason @ A+
or look up Grimor for his write up located on his sig
Vinne Chase wrote:diy and get the clear parts from Jason @ A+
or look up Grimor for his write up located on his sig
kinda late for that, i needed new housings anyways and they are much cheaper than the stock ones and the work is already done. anyone have any ideas?
Those look sweet man. How do they compare to stock headlights as far as visibility goes?
My Car Domain Page
well as of now horrible, my above posts state my aiming issue, still waiting to hear back from the seller on ebay and hopefully some people on here.
have you tried adjusting it using the aiming screws, they are like hex looking screws that you turn and adjust the headlights.
the ones supplied on the aftermarket lights are philips screwdriver adjustable and the screw comes out of the back so as to puch up against the metal but theres nowhere for it to go. i dont have the stock headlight infront of me but im thinking that maybe i need to swap ou the adjusters for the stock ones. anyone know how to take them off?
mine work fine, and according to those whove driven in front of me, they are bright as can be. do you have the correct brackets behind the lights?? if not, that could be your issue. theres brackets that most people dont seem to know about
RIP Saint ........ JBO
Eazy Ent. ( 716 ) wrote:mine work fine, and according to those whove driven in front of me, they are bright as can be. do you have the correct brackets behind the lights?? if not, that could be your issue. theres brackets that most people dont seem to know about
whoa, what brackets? those metal things on the bottem? that hold the headlight into the frame? are they supposed to go into that hole or just sit in front of it? im thinking maybe if i set them in front instead of inside of it they might aim up a bit. Its actually my sisters account/car so this is all new to me, im an N-body guy personally, got plenty of time under my belt modding my cars but i know nothing about j-bodies.
if you are using the brackets that came with the aftermarket lights I suggest swapping just the brackets with the stock brackets off the old headlights...
the aftermarket brackets tend to be cheap...
Vinne Chase wrote:diy and get the clear parts from Jason @ A+
were on his site are these clear lenses?
Big Boi -Coloradojbody.org- wrote:Vinne Chase wrote:diy and get the clear parts from Jason @ A+
were on his site are these clear lenses?
Lol... I just PM'ed him the same thing, I got excited.
Quote:
Hi Dave,
He was probably thinking or meaning the whole chrome/clear housings. I don't have access to just the reflectors, sorry.
--- Dave Dunsmoor wrote:
Someone in the exterior forum mentioned you were selling reflectors for the new style headlights. Can you fill me in please? I couldnt find any on your website.
(This thread...)
http://www.j-body.org/forums/read.php?f=7&i=321452&t=321452)
Thanks,
Dave
