does any one know where to find a set of the original clear taillights have only seen one set would like to buy a set for mine any help is appreciated.

he's got one set left. good luck man.
http://www.aplusperformance.com/catalog/product_info.php?products_id=6147&osCsid=5fb7f50dfbae41702b0c8e0c4ff6c49e



-Www.IznTrbl.Com-

Those are very hard to find, try talking to Jason from a+ performance, or Izn Trbl (spelling) i know he makes them.

i got a set im meeting to sell this weekend lmao.. try procarparts.com also

i would like this same look for my sunfire...anyone know where i could get them?

ummm talk to jason at a+ performance(who has one set left, and never getting them again) or talk to Izn Trbl and have him make you a set.

umm i drive a 2 door

then you gotta make your own. good luck man.



-Www.IznTrbl.Com-

thanks for the info....you got mail...(IZN TRBL)

kept saying ur email has an error and wont go through so just in case here were my questions....


Hey,
You responded to a post recently about 2dr sunfire tail lights…”you said gota make your own”…some major questions
1. how difficult is this to complete on a scale of 1-10
2. do I have to bake my lights like they are cake?
3. can I do this without donor lights…(aka one or two day project) so the cars not MIA for tooo long.
4. do you/ are u willing to still just make some at a higher expense?

Thanks a million…
JZ

#1, Difficulty 5-7 ish
http://www.j-body.org/forums/read.php?f=46&i=163374&t=163374#163374

If it says page not displayed, it's because the mthly bandwidth is used... Sometimes gotta love the free web hosts.

the answer to #2 is no. (Unless IZN has a secret he's not telling)
http://www.j-body.org/forums/read.php?f=46&i=203579&t=203579

The answer to #3 is maybe, depending on what you want done. I'd go with a donor set, just in case.

The answer to #4 is those are prefab'd ones from another company. That company no longer produces 'em. IZN only does the lenses (again, unless he's got a secret he's been hiding)

^^^ nope. ive got nothing to hide (on this subject anyway )
i just chipped away as much as i could and then used a flat dremel blade.
good luck man and let me know if you have any questions.



-Www.IznTrbl.Com-

lol Ya know, why didn't I think of that at first.... woulda been a heck of a lot quicker.

thanks for the help