I own a 1999 Cavalier Z24 and I have been wanting to fill in the "Z24" on the side moldings for a while. I have seen many cars with it but I am not sure how to go about doing it - I noticed a link for this on TeamForwardMotion.com but it is a broken link. Can anyone tell me where I can get a decal for filling it in or any other method to do this? Thanks.
talk to Jason at A+ Performance, im sure he can get you some vinyl to fill that in.
i used pinstriping from autozone. 1/8 inch for the small lines and 1/4 inch for the fatter ones and it came out pretty cool. just take your time and make sure you have a sharp razor. its fairly easy but very time consuming. hope this helps
simple minds talk about other people.
average minds talk about events.
great minds discuss ideas
I used chrome tape. took me about 2 1/2 hours but I think it looks good
the tape really stands out. Check out the pics in my registry. The one with my car covered by snow. Also look how deep the shine is on the side. In that pic my car hadn't been waxed in over 6 months. I use NuFinish
I bought mine from
CE Graphics, actually it was off of ebay (seller's id is: decalz). I paid $9.99 for a pair of red ones. They can do pretty much any color you want and if the auction is for red, just tell them that you want another color. I've purchased three from them and always had excellent service.
-Erin
Can not find one on ebay (Seller has no items for sale.) or one the linked site.?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I did find this site though.
Clicky
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
^^^^thats where i got mine. Look good.
2006 Cobalt SS 2.4L 9.6 @74mph 1/8th mile w/2.28 60ft
sorry filling in the Z24 molding is not attractive... so dont do it...
-------------
Now Blazing: Bunker Bud
^^^^^your opinion
2006 Cobalt SS 2.4L 9.6 @74mph 1/8th mile w/2.28 60ft
Yeah, I think it really adds a nice touch - thanks for all the help guys, I'll have to check those links out.
http://www.cardomain.com/id/1999cavyz24
6(sic)6 (been bagged!) wrote:i used pinstriping from autozone. 1/8 inch for the small lines and 1/4 inch for the fatter ones and it came out pretty cool. just take your time and make sure you have a sharp razor. its fairly easy but very time consuming. hope this helps
I have one more thing to add to this, use an unlined sheet of paper and lay over the Z24 and use a pencil to make a rough outline of the Z24. This will halp you to make the pinstripping about the proper size you need to fill in. I did it on my 98 Z and it looks great.
98 Z24
RIP Specks
Same here,
Got mine/been getting from the guy in Canada off ebay Decalz.
But those other places are cool too.
Good luck.
-M
Remember....syringes go in the RED waste basket.
damn! that's EXACTLY what I did to do mine with the tape. Using paper and a pen to get the size!
I e-mailed Vincent from the link above almost a week ago, but I still haven't gotten a response. Anyone know what going on? Is that still his e-mail address? I wish I could get a hold of him cause those decals on that website are awesome... where do I go from now? Thanks.
http://www.cardomain.com/id/1999cavyz24
Anybody know anywhere else to go? I really like those decals ad I cannot find any of them on eBay.
Cavalier Z24
Also listening...and looking.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
UPDATE!
Ryan from GrafxWerks is helping me out! He is ordering some side mouldings to find the correct fitment so he will be able to offer those. I'm also sending him some pics and measurements of the z24 3rd brake light so he will be able to create that in different colors. I've been talking to him about some other decals also (the ones from Vincent's page) and he posted some of them of his page, ready to order! It's been a pleasure working with GrafxWerks - they are true businessmen! Make sure that you guys go and check out their site.. they have some pretty new and sweet decals. Thanks to you guys this is getting taken care of! I'll let you know how the rest goes...
-Jason
Cavalier Z24
Bump..watching.....and .............waiting
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Ryan just picked up the side mouldings and should have them done in about a week! I'll keep you guys posted.
- Jason
Cavalier Z24
The molding inlays are finshed and ready to order! You can pick them up at Ryans site at GrafxWerks.com! I ordered mine today and I will post pics as soon as they are installed.
-Jason
Cavalier Z24
