OK, so I just got HPT and I am trying to hook my AEM wideband into the program so I can get some accurate logging. I got to the part where I have the wideband on the primary table and its showing a reading, but its at like 12.8 and the gauges says 14.5. Thats my first question, is there something I am not doing, anyone have the AEM wideband hooked up, I know there are two wires a white and a blue.
Edited 1 time(s). Last edited Wednesday, March 25, 2009 8:24 PM
http://www.overkillengineeringmotorsports.com/
it stays at 12.8 the entire time? if so it sounds like you have the wrong wire tapped for the input
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
yeah its really strange. I Tried both wires in imput one and wire stays around 12.8 and the other moves around like 10.8-13.5 but really fast. When the guages still says 14.5-14.8 steady.
http://www.overkillengineeringmotorsports.com/
the white wire has to be in PIN 1 - 4 and a ground has to be in PIN 5 or 6. if they get close to matching, then all you have to do is compensate for the offset. mine is off by ~ +0.30
12.33 @ 111.67 mph [Oct 2009]
Dyno'd on 08/02/09 - Mustang Dyno:
327.6 WHP 333.6 WTQ [10.1 AFR]
