well i have spent most of the morning trying to find awesers. i didn't do so well.
i have a 00 z24 5spd with ac and am just about done my turbo setup. so from what i have read i can take my car to a gm dearler 10 min away put in the injectors,(prior to finishing my turbo) get it flashed take it home put the turbo on and i have a finished car? i only wanna run 7 psi on a supper 60 t3 turbo if that matters. do i need a 2 bar map sensor or do i have one already in the 00?

or my second opition would be driving my car 2 hours on a highway after i get it altogeather and taking it to a guy with hpt for 600 but doesnt know the prograhm or chevs very well. hes a 700whp honda kinda guy.but he has a dyno. i just don't want to blow up thats all.
sorry if i missed the aweser in the forms already. thx in advance

You can buy HPT for $650 and do it yourself, I'd just spend the extra $50...

As far as the dealer goes, they won't do it unless you have the GMPP Supercharger on there, and a receipt. The only three ways to get it is to 1. Have the GMPP S/C, 2. Use HPT to flash it, 3. Have a good friend at the dealer.

Also, you would have to buy a 2 bar sensor, you don't already have one (comes in the GMPP kit for the S/C's).





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

do i need a 2 bar for hpt or just the gm flash?
i have a good friend at the dealer his dad owns it but does he have to be a tech cause hes only a tech a toyoda....

kyle phillips wrote:do i need a 2 bar for hpt or just the gm flash?
i have a good friend at the dealer his dad owns it but does he have to be a tech cause hes only a tech a toyoda....

If you are going to use the reflash you need to get the 2bar sensor....



P&P Tuning
420.5whp / 359.8wtq