I've just recently aquired hptuners and i went to do some logging today and for some reason, hptuners is not displaying kr in any of the logs. it's showing it as an unsupported parameter.

am i missing something here? i do have the latest version of hptuners website and my laptop is running vista (not sure if that matters)

did you datalog the PID? in the histogram, click the configure button and make sure you are showing the same pid as the the one on your graph


14.82 @ 97 mph

when i go to the histogram, i get:

This Histogram is not supported with the current loaded parameters.

If this Histogram references Tables, it is possible that the vehicle
you are connected to does not support these Tables. It is also possible
that the sensor required for the Table is not found in the loaded
parameters.

If this Histogram references Sensors, it is possible that the sensor
required is not found in the loaded parameters.

If this Histogram references PIDs, it is possible that the PID required
is not found in the loaded parameters.

You will find all of your loaded parameters located on your Table Display.
To add more parameters, right click the table display and click insert.

For example, if you have a histogram built that maps Timing Advance
and you do not have Timing Advance inserted on your Table Display,
the Histogram will not function.

i get this on 1-7

i'm not sitting in the car right now though, just viewing a log...

i'll have to look into the histogram next time i datalog...

i'm still getting the messsage that i posted above when i'm connected to the car... is it possibly due to me runnin vista on my laptop??

i have a list of dtc's too if that will help narrow down the problem...

(keeping in mind the car doesn't have airbags in it, the cat is gutted, and i have HID's so no low beams)