Can we get a sticky for PCM/ECU pinouts - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Can we get a sticky for PCM/ECU pinouts
Tuesday, August 28, 2007 9:31 AM
Can someone make sticky for PCM/ECU pinouts for '95>??? It used to be in the New York J's library but they aren't up and running anymore...








"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"

Re: Can we get a sticky for PCM/ECU pinouts
Tuesday, August 28, 2007 11:44 AM
I'll work on getting the information up, there are a lot of different combinations of wiring diagrams.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Can we get a sticky for PCM/ECU pinouts
Tuesday, August 28, 2007 12:10 PM
these??

http://projectwyldfyre.com/tech/ln295_97/pcmwiring.html

http://projectwyldfyre.com/tech/ln298/pcmblack.html


came from Kardain's website. he took alot of the old NY J-body stuff and hosted it....heres the link to it all

http://projectwyldfyre.com/techarticles.html








Built Not Bought
Re: Can we get a sticky for PCM/ECU pinouts
Tuesday, August 28, 2007 2:28 PM
^^Good info.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Can we get a sticky for PCM/ECU pinouts
Saturday, September 08, 2007 11:53 PM
I also have access to the Eco pinouts and several others... I set up e-mailed replies, so if there are any requests, I'll put 'em up.









Re: Can we get a sticky for PCM/ECU pinouts
Sunday, September 09, 2007 11:57 AM
I would like the L61 pin out and the LSJ if you can get it.

Thank you!

Darryn

2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
Re: Can we get a sticky for PCM/ECU pinouts
Sunday, September 16, 2007 7:49 AM
Let me find my ODB1 stuff and get it up also.
Re: Can we get a sticky for PCM/ECU pinouts
Sunday, September 16, 2007 12:10 PM
L61 added, don't have the LSJ files, but cobaltss.net may.
http://projectwyldfyre.com/tech/pdf/l61eco/engine/l61_pcm_pinout.pdf











Re: Can we get a sticky for PCM/ECU pinouts
Monday, September 17, 2007 5:07 AM
Kardain , I just noticed on your site. Where it says "LD9 PCM Outputs" that the link address http://projectwyldfyre.com/pdf/99ld9/engine/pcm_outputs.pdf , says "99" ld9. Might want to change that to 97-98. The out puts show a 1 wire knock sensor and wiring for EGR , which are different on a '99.






"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
Re: Can we get a sticky for PCM/ECU pinouts
Monday, September 17, 2007 6:20 AM
Someone have Ion PCM wiring?
Re: Can we get a sticky for PCM/ECU pinouts
Monday, September 17, 2007 3:18 PM
Gary, its a folder name that references "99", but I did add the description afterwards on the main page for 97-98 model year










Re: Can we get a sticky for PCM/ECU pinouts
Monday, September 17, 2007 3:19 PM
Garrett wrote:Someone have Ion PCM wiring?


What year? I'll see if I have it (long shot though)









Re: Can we get a sticky for PCM/ECU pinouts
Monday, September 17, 2007 3:21 PM
2004+ each year
Re: Can we get a sticky for PCM/ECU pinouts
Wednesday, October 17, 2007 4:48 PM
i need a 96 2.4 man pin out if anyone could help



Re: Can we get a sticky for PCM/ECU pinouts
Wednesday, October 17, 2007 4:52 PM
i have 2001 so ld9 and ln2...if you want um jsut ask



My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again
Re: Can we get a sticky for PCM/ECU pinouts
Wednesday, October 17, 2007 5:02 PM
I need pinouts for the 2.4L '00+ and the '99 2.4L. I can't seem to find either one.



2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
Re: Can we get a sticky for PCM/ECU pinouts
Friday, October 19, 2007 4:02 AM
I attached all the 00' 2.4 pin outs here.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Can we get a sticky for PCM/ECU pinouts
Friday, October 19, 2007 7:49 PM
I'll get the 99 one up in the next couple days.









Re: Can we get a sticky for PCM/ECU pinouts
Monday, October 22, 2007 6:55 PM
Kardain wrote:I'll get the 99 one up in the next couple days.

Any update on the '99?



2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
Re: Can we get a sticky for PCM/ECU pinouts
Tuesday, July 15, 2014 12:32 PM
Sooooo, a big bump of an old thread. Does anyone happen to have the pinouts for a 97 2.4 pcm? All the links in here are dead. Also figured anyone that might have them may be subscribed to this thread.



Re: Can we get a sticky for PCM/ECU pinouts
Tuesday, July 15, 2014 3:05 PM
lafonjef wrote:Sooooo, a big bump of an old thread. Does anyone happen to have the pinouts for a 97 2.4 pcm? All the links in here are dead. Also figured anyone that might have them may be subscribed to this thread.


Yeah, links are long dead. The registrar I opted to use failed to notify when the domain was set to expire back in 2k7. It ended up getting reserved pre-expiration and snatched pre-expiration by an ad squatter.

I don't have the program I was using for pinouts anymore so current access to pinouts will be difficult, but I'll look in my site archives and see if something is there. No guarantees.










Re: Can we get a sticky for PCM/ECU pinouts
Tuesday, July 15, 2014 3:07 PM
Gd autocorrect.. "snatched post-expiration"









Re: Can we get a sticky for PCM/ECU pinouts
Tuesday, July 15, 2014 3:07 PM
I think I printed them out way back in the day...I'll dig through my old Cavy stuff and see if I maybe kept them.



2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
Re: Can we get a sticky for PCM/ECU pinouts
Wednesday, July 16, 2014 2:27 AM
Thanks guys!



Re: Can we get a sticky for PCM/ECU pinouts
Wednesday, July 16, 2014 3:28 AM
I'll look, but I think I only have the 00 files.

I can scan the 99 files out of my service manual if someone needs them.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search