Wheels are factory 88 RX7 meshies. The tape out to the lip, so they have a slight curve to the spokes rather than flat, and they are a nice, modest 15X7. All I need for my car.
Side skirts haven't been bought. I already had my body work/paint appointment setup and my deal on the Greddy skirts fell through. I will just wait it out until I find another good deal on something clean and simple.
The plans? Like I said, just a fun DD that I autocross.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Since I seem to have another minute, here's everything I can remember:
Done or in the process:
INTERIOR:
-Retrofitted spring loaded cup holders under head unit and fabbed up trim panel for it(MR2's don't have any from the factory)
-Nardi Classic black/black/red stitching wheel.
-Celica GTS dark blue/black clotch seats
-Black carpet
-Partial black interior(basically doing a black/dark blue 2-tone. Anything vinyl is staying dark blue. Everything plastic or carpet is getting swapped for black)
-Short throw shifter with 1/2" drop plate, Leather knob/boot/ebrake handle
-Custom made aluminum shifter surround
-Alpine CDA-105 head unit
-Rainbow SLC265.25NG components
-RE(US Amps)1200.4 amp(i think that's the model number.)
-eD EHSQ8 subs in sealed boxes(soon enough the boxes will be made)
EXTERIOR:
-Border replica front bumper in urethane
-Phoenix Power replica rear bumper add-ons
-Cleaned and re-blacked all moldings
-Smoked turn signals and bumper markers
-94+ JDM tail lights with black center panel and amber turn signals red'd out for a cleaner look
DRIVETRAIN:
-Stainless long tube header, catless midpipe, custom piping, Magnaflow biiiig ass muffler and custom bent exit pipe
-Fairly basic cold air intake drawing air from drivers side side-vent
-Poly front motor mount
SUSPENSION:
-KYB AGX's in housings with new mounts and H&R Sport springs assembled, ready to thow on
-New ball joints/tie rod ends
-1988 BBS factory 15X7 wheels with tires to be announced
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
In the near future:
-Suspension Technique sway bars/poly bushings front and rear
-Hopefully Greddy side skirts for a reasonable price
-Strip old tint from windows and have new tint applied to all windows and t-top glass to match
Honestly, that's all I have planned.
Edited 1 time(s). Last edited Saturday, April 02, 2011 7:19 PM
On the other hand....you have other fingers.
"You really need to staple your face shut"-THE Joey Baggs.
