Impala has been throwing codes for the past little while. Finally got the time to hook up HPTuners too it and see whats going on ...
Anybody know of any good technical sites that can help me out?
I just signed up to
http://www.w-body.com/forum/ but they dont see to have much info on this.
60degreeV6.com?
------------------------------------------------------------
NAIOA
national american impala owners association. covers model year 2000+ impalas.
clubgp.com
they have an impala section
3800's a 90* V6, not 60*
i have no clue what they are. only advice i could give you is clean the MAF sensor, clear the codes, and see if they come back up
Andy
it's not how fast you go, it's how you get there that counts.
ZZP XP cam, 1.6 rockers, 105# springs, speedbuilt FWI, 3.3" modular pulley, TOG headers,
3" exhaust, flomatched injectors
'97 GTP 14.06@100.6mph pre cam w/ 3.5" pulley, I/E
i would start with a mass air....not sure of the other codes havent really heard of them, im familier with the p codes
Most of the W-Body boards didnt have much info on this.
I went over to the HPTuner forums and asked there ... p-code is my concern.
Most likely a faulty connector to the MAF. Getting that changed next week.
