CEL on integra - Other Cars Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
CEL on integra
Monday, March 13, 2006 7:46 PM
My wife has an Acura Integra LS. It is a 2000 5speed. I hardly drive it at all(every time i drive a standard, i get speeding tickets) She said for the past few weeks the Check Engine Light stays on after she starts the car and flashes. after a few seconds it goes away. My question is, is this normal, or is it not supposed to do that on start up? like i said, i don't drive it, so i don't know if it has been doing it since she bought it or if it's new. if it's not normal, I'll stop by the dealership i work at p/t and use their scan tool this weekend. anytime before just isn't possible. Thanks.




Re: CEL on integra
Monday, March 13, 2006 10:12 PM
Read ur owners manual and see if this is a normal issue.Most cars only show the cel on start up then it goes off once running.I am guessing it maybe something else besides a normal start up and running condition.Checking the ecm for codes want hurt and auto zone will do it anytime for FREE,if u can swing into one b4 u do the pt thing.



Re: CEL on integra
Tuesday, March 14, 2006 5:50 AM
anytime a cel gets thrown, you need to check...

that link provides how to do it yourself (ive done it a few times, usually its the stupid gas cap coming loose), it takes all of 20 seconds

gl
Re: CEL on integra
Tuesday, March 14, 2006 1:14 PM
great info on the integra forum. maybe i'll join just for help with my wife's car. It'll never be modified the only after market thing on it is a second set of wheels (steel) with winter tires and a pioneer deck. I'm not allowed near it unless it needs help



Re: CEL on integra
Tuesday, March 14, 2006 2:29 PM
just checked it. it is the "maintenance required" light that flashes. Check engine light isn't the culprit. the MR light flashs 10 times then shuts off. sorry for the mixed message earlier. Again, i don't drive the car. I'm going to go through the owners manual and see if there is anything on that flashing. Thanks again.



Re: CEL on integra
Tuesday, March 14, 2006 2:40 PM
looks like maybe i didn't reset the that indicator when i did her oil change last.

owners manual on the indicator:

*For the first 6,000 miles after the maintenance required indicator is reset, it will come on for two seconds when you turn the ignition switch ON

*Between 6,000 miles and 7,500 miles this indicator will light for two seconds when you first turn the ignition switch ON, and then flash for ten seconds

*If you exceed 7,500 miles without having the scheduled maintenance performed, this indicator will remain on as a constant reminder

I can't say this post was a waste, i now know how to diag the actual CEL. Thanks for all the help again. I'll reset it on the next oil change



Re: CEL on integra
Wednesday, March 15, 2006 5:41 AM
just in case you didnt know how to reset the stupid thing (haha, yea, this light has annoyed me on more than a few occasions), here is how to do it

3 short pages w/ 3 pictures on where/how to reset
Re: CEL on integra
Thursday, March 16, 2006 11:16 AM
Thanks!



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search