Camera sucks. Not sure if the tape is jacked up or if the camera was hating life.
Sound is fine though.
http://home.comcast.net/~mrluos/firststart.wmv
Doesn't idle at 950 RPM's too well yet. Probably gonna have to bump that up.
The camera sound doesn't pick up the actual sound very well. It sounded much better in person. Although even that will change once it gets a good tune on it.
No leaks.
Oil pressure was up around 60 PSI at 1400 RPM's.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.
is it just me? or is your cam HUGE? or is that the bad idle you was talking about? sounds like once you get it tuned it should run reeeal perdy
Cam is pretty big. 248/254 629/622 113
It wouldn't idle on its own yet. Needed throttle support.
Needs tuned for sure though. Also...I might try to get it out of the garage and started. I think it echo'd pretty bad in there.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.
you know there is a break in for a new cam. your supposed to go from a certin rpm to a higher one then back each for a certin time. it should be listed with the cam. im assuming you got a new cam in it. sounds like it will be real mean when shes all set.
yeah but theres also a saying that with a new cam you're gonna within the first 20-30seconds if it wasn't installed correctly or if theres something wrong with it...when something goes wrong
if it ain't broke...MAKE IT GO FASTER
New LSx cam doesn't need broken in.
Timing was set, I made sure of that. It isn't just a new cam...it is a completely new stroker.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.
sweet man . .great job.. did you drill a 7/32 hole in your T/B butterfly.? I had to do that with my cam and its not as big as yours. just a thought..
Brad
2004 GTO M6 Impluse Blue 1 of 323
429rwhp, 388 rwtq(current with cutouts open)
Stock LS6 heads, HPE S-cam, SW LT headers (no cats), B&M shifter, AeroForce gauges,
FAST 90mm, N.W. 90mm, ford 30#, AMW Catch can, DMH cutouts, K&N intake; Textralia
clutch and flywheel, Pedders Xmember, Diff insert, Patriot Gold spring kit,
Speed Inc. Solid Tensioner, 3.91's
Koni improved (yellows), Baer 14"F & 13"R, super blue fluid, Beyern Type 5 wheels.
Haven't yet.
Gonna try adjusting the FAST 90mm first.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.
sweet sh!t gotta love it..
mmmmmm, you need to get that outside so we hear less echo. thanks for the vid, though! im content now
Andy
it's not how fast you go, it's how you get there that counts.
ZZP XP cam, 1.6 rockers, 105# springs, speedbuilt FWI, 3.3" modular pulley, TOG headers,
3" exhaust, flomatched injectors
'97 GTP 14.06@100.6mph pre cam w/ 3.5" pulley, I/E
Hopefully I can have a shot outside the garage in a couple weeks.
Maybe sooner if I haul ass in the garage the next couple days.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.
how much for that motor ? completed. I am currently looking for a C5 FRC and that would be one wicked combination if I dont go with the D1SC or VQ S Vortec.
01 Z24 Turbo /// First Reflashed Turbo AUTO MMMM YUMMY
Sounds good, I was going to ask if you had a cam in it. Sounded real loopy. Then I read the post.
I'm sure that video doesn't do its justice for that sound of that car. Like to see it in action.
dragracemyz24 wrote:how much for that motor ? completed. I am currently looking for a C5 FRC and that would be one wicked combination if I dont go with the D1SC or VQ S Vortec.
The shortblock alone (all forged) was $3700.
Add heads
Add cam
Add intake
Add clutch
You get the idea.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.
Got the radiator installed.
All the hoses as well. Including the power steering cooler.
Drained the tranny. Need to fill tomorrow.
I still need to add coolant to radiator.
Driveshaft loop is up, torque arm needs to follow.
Rear control arms need installed.
Wiring under car needs hung up properly.
Need to find a bellow to install between the MAF and the throttle body. The one I have doesn't fit.
Need to bleed the brakes.
Basic tune is coming Wednesday/Thursday.
Couple pics....
After looking at it...I decided I will be painting the area marked here.
It will be the same black as the airbox lid.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.
That sounds so great..it'll be even better once everything is tuned just right. Good luck with the rest of it.
Blown.
Going in for a base tune later this week....hopefully. As long as the spots haven't filled up.
Better video to come.
________________________________________________________________
1999 Pontiac Trans Am WS.6 #1747
Sounds like this....when it had the LS1...
Currently under the knife. Transplant surgery.