Dave Hill retires (Vette C5-C6 creator) - Other Cars Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Dave Hill retires (Vette C5-C6 creator)
Tuesday, November 08, 2005 12:39 PM
General Motors Corp. announced that David Hill, currently vehicle chief engineer (VCE) of the Chevrolet Corvette and vehicle line executive (VLE) of performance cars, will retire effective Jan. 1, 2006 after more than 41 years of dedicated service.

Tom Wallace will replace Hill as vehicle line executive of performance cars and vehicle chief engineer of the Corvette. Additionally, he will assume responsibilities for compact rear-wheel-drive performance cars including Pontiac Solstice and Saturn Sky. Wallace currently is VLE of small and midsize trucks.

Lori Queen, currently VLE of compact cars and the Pontiac Solstice and Saturn Sky, is appointed VLE of small and midsize trucks, replacing Tom Wallace. The North America compact car team will now report to Peter Mertens, vehicle line executive of global compact cars. Mertens is currently leading the Global Compact Car Development Team located in Germany.

"Dave Hill has taken the Corvette to heights that few of us can imagine. In terms of performance, refinement and value, he has truly helped to make Corvette second to none. He is a true car guy who will take his rightful place among the legends of Corvette lore," said Bob Lutz, General Motors vice chairman, global product development.

"What do you do to replace a guy like Dave? You do your best to get another one. Tom Wallace also is a car guy and racer who will make a perfect choice to lead the Corvette and Performance team. Besides, Tom was Dave's choice too. That should tell you all you need to know," Lutz concluded.

Hill has a rich history with GM since joining Cadillac Motor Car Division in 1964. He moved through various engineering positions and was named an executive in 1979.

In 1982, he was named chief engineer of the Cadillac Allante. Following the introduction of the Northstar engine in 1992 in the two seat luxury roadster, Hill assumed chief engineer responsibilities for the Cadillac Deville and Concours.

Hill was named chief engineer of the Chevrolet Corvette in 1993, only the third chief engineer for the sports car in the vehicle's 53-year history. In 1995, Hill was named vehicle line executive of performance cars and led the development of the fifth-generation Corvette and the introduction of the Cadillac XLR.

Last year, Hill launched the sixth-generation Corvette followed by the introduction of the new 505 bhp Corvette Z06 for 2006.

Hill holds a bachelor's degree in mechanical engineering from Michigan Technological University and a master's degree in mechanical engineering from the University of Michigan.

Wallace has been with GM since 1966 when he joined Buick Motor Division in Flint, Mich. He was named to an executive engineering position in 1980 while still with Buick and was later named to the GM Truck Group in 1995. Wallace holds a bachelor's in mechanical engineering from Kettering University (formerly GMI), and was a Sloan Fellow, earning a master's in business administration from Stanford University.

Wallace and his team were responsible for the development and launch of Chevrolet TrailBlazer, GMC Envoy, Buick Rainier, Chevrolet Colorado, GMC Canyon and Chevrolet SSR. Additionally, he led the highly successful launch of the Saab 9-7X and the HUMMER H3.

An avid performance car enthusiast, Wallace has enjoyed competing in both amateur and professional road racing, rally car and drag racing. He started racing with the Sports Car Club of America (SCCA) more than 30 years ago and has raced in a variety of Sedan and GT classes with race-prepped Oldsmobile, Buick and Chevrolet models.

Queen received a bachelor's degree in electrical engineering from Kettering University (formerly GMI). She recently led the launches of some of GM's most successful products currently in the market: Chevrolet Cobalt and HHR, Saturn ION, the Pontiac Solstice and the soon to be released Saturn Sky.

Queen has been with GM since 1974 and has held numerous Engineering positions, including vehicle chief and VLE assignments for both cars and trucks.

GM Press 2005-10-27






>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----


Re: Dave Hill retires (Vette C5-C6 creator)
Tuesday, November 08, 2005 4:56 PM
Dave hill was a great person and did alot for the Corvette community as well as a great job with the C4 through C-6 Corvettes. I hope Tom Wallace can continue the passion Dave hill applied to the design and production of the corvette platform.


Re: Dave Hill retires (Vette C5-C6 creator)
Tuesday, November 08, 2005 8:26 PM
he did alot of good things. but there will be better things to come..



. member 1244or55
.http://www22.ocn.ne.jp/~cavalier
Re: Dave Hill retires (Vette C5-C6 creator)
Wednesday, November 09, 2005 10:21 AM
^^And yes he did, I personally think it will take a lot to even reach Hill's heels at what he has done to the C5 and C6.
The new guy being from the Mid-size trucks section has me a little worried. Even though some of GM's mid-size trucks are good in their segment, some are plagued with recalls.
The SSR is a sorta flop and the Colorado/Canyon twins have been exceled by the competition in less then a year. And this is all under Wallace's watch.
I dunno watching Dave Hill retire and Tom Wallace step up keeps me kinda worried on the next C7 and what it will be.



>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----

Re: Dave Hill retires (Vette C5-C6 creator)
Wednesday, November 09, 2005 10:31 AM
yes. i cringe at the though of someone who designed trucks and sedans designing the vette, who knows maybe he will get a better rear suspension in that car.





Re: Dave Hill retires (Vette C5-C6 creator)
Wednesday, November 09, 2005 12:02 PM
Mr. Goodwrench-- I did not know that the new chief engineer was formally a full size truck guy. This has me worried also. All we can do now is wait and see I guess......

My dad showed my pics of the new escalade the other day I really like the looks of that hopefully he worked on that car also.


Re: Dave Hill retires (Vette C5-C6 creator)
Wednesday, November 09, 2005 12:38 PM
RkSport 2003 wrote:Mr. Goodwrench-- I did not know that the new chief engineer was formally a full size truck guy. This has me worried also. All we can do now is wait and see I guess......

My dad showed my pics of the new escalade the other day I really like the looks of that hopefully he worked on that car also.

Mid-size trucks, not full size truck.
I'd feel a wee bit better if Wallace came off the full size trucks dept as they are well engineered, but in they end they are still trucks none the less.
As for the Escalade pics, I have them too, but I can not show them till later this week hehe.




>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----

Re: Dave Hill retires (Vette C5-C6 creator)
Wednesday, November 09, 2005 4:02 PM
Mr.Goodwrench-G.T. wrote:
RkSport 2003 wrote:Mr. Goodwrench-- I did not know that the new chief engineer was formally a full size truck guy. This has me worried also. All we can do now is wait and see I guess......

My dad showed my pics of the new escalade the other day I really like the looks of that hopefully he worked on that car also.

Mid-size trucks, not full size truck.
I'd feel a wee bit better if Wallace came off the full size trucks dept as they are well engineered, but in they end they are still trucks none the less.
As for the Escalade pics, I have them too, but I can not show them till later this week hehe.


I'll leave that post to you then buddy.


Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search