Hey guys, I'm about to start modifying my SFI soon and I just wanted to run these mods by a group of people that knows about these motors. I'm not going for a ton of power, I'd like to be in the 150whp-175whp range. Here's what I have in mind so far. 56mm Tb swap from a 2.4 with a TB spacer for a little more fuel atomization, pre-fab or custom CAI, port and polished head, E3 plugs and thicker wires, stainless exhaust, and higher flowing injectors. I think I have an L43 vortex 2200 so I was wondering if I would need a cam swap as well. But please by all means let me know what all supporting mods/parts I would need for all of these mods to go into my S-10. Thanks guys! P.s. If anyone could verify if my 2200 or a vortex or not that would be amazing!

Attachments

WP_20160525_18_40_32_Pro.jpg (1768k)

says it clearly on the intake you have a 2200 and a tb spacer is a waste of money. The fuel is injected after the tb on these motors so the tb spacer does nothing.

I knew it was a 2200. I asking if anyone knows how to tell if it is an L43 2200.