ok i own a 1999 Z24, i just ordered some altezz tail lights and clear corners, can someone please help me, maybe let me know where a diagram is on how to remove and re install my headlight corners and tail lights!!!!!!!!!! If you need to email me its Brianmatthew1123@sbcglobal.net
ANY HELP IS APPRECIATED!!!!!!!!!
http://www.cardomain.com/ride/2055380?poll_action=view
FOR SALE: (5) '95-'99 Z24 Rims
all you do is for the corners is pop the hood, take off that black plastic piece that covers the raditor. then there are i think 2 bolts that hold in the head light. take them out. then take out the head light. the you have easy access to the corners. take off the screw that hold the corners in, take out corners, then put in the new clear corners.
the tail lights are even easier. you can access the outer tail lights by poping the trunk, and then pulling down the carpet that is behind the out tails. 3 screws hold those in as well. then for the inner tal lights, just look up. i think aslo 3 screw hold in the inner tail lights
Im a Xbox 360 fanboy...and damn proud of it!!
get a socket set in mm measurement. I can't remember exactly the size you need for the tails, I think it's 11mm and 13mm. get a wide range of sizes so you're covered.
-----------
Words that you can't use in modding: Finished, Perfect, Cheap.
thanks a lot....you guys are like a gang of cavi/sunfire brothers or something
FOR SALE: (5) '95-'99 Z24 Rims
a gang??? LOL!!
i wouldn't say that. jus that some of us like to help others out when needed.
Im a Xbox 360 fanboy...and damn proud of it!!
haha and i apprecheate your help man, thanks
FOR SALE: (5) '95-'99 Z24 Rims
If you can't install clear corners and tail lights then I hope you don't work on your own car. I have always said that there are too many people out there tryin to by mechanics.
5 seconds to find another street...
Omar Delara wrote:If you can't install clear corners and tail lights then I hope you don't work on your own car. I have always said that there are too many people out there tryin to by mechanics.
5 seconds to find another street...
hey, there was a time when i didn't know anything about cars either........now i know how to do just about anything with a car, everyone starts from nothing, as long as you do a mod and learn from it, your doing good
You'll never touch God's hand
You'll never taste God's breath
Because you'll never see the second coming
Life's too short to be focused on insanity
I've seen the ways of God
I'll take the devil any day
Hail Satan
(slayer, skeleton christ, 2006)
Ditto I know a healthy bit of info now but there was a time when I had trouble installing my corners.....although I looked in the owners manual to find out.
____________________________________________________________________
Madjack wrote:Like I said before, building an engine like ours (2.2 or 2200) is a painstaking chore , since there is so few custom made parts. It's frustrating to me too, but that's what I like about doing this engine, it's the challenge.
I agree that as long as you try its okay, so take some time on your own and do what you can on your own car.
Take it easy.
Omar Delara wrote:If you can't install clear corners and tail lights then I hope you don't work on your own car. I have always said that there are too many people out there tryin to by mechanics.
5 seconds to find another street...
Im sure at one point you didnt know how to either. Gotta learn somewhere
Ok @!#$ who was saying @!#$ about me not knowing how to work on cars......first of all i was asking for some tips from people who have done it before....i know how to do it, just wanna make it easier maybe. My grandpa owns 2, 80 x 40 garages and has worked at GM 45 years.....he has more than likly put together the car you are driving so i would shut the @!#$ up.....if you think i am not mechanicly inclined you can go @!#$ yourself.
thank you everyone for the tips....the lights and stuff should be coming in soon so i will install them once they get here....check my cardomain to see how it turns out....i have quite a lot of other mods coming too....nothing drastic because im 15 and my grandpa wont let me do that kind of stuff to the cavi...but what the hell, im trying
http://www.cardomain.com/ride/2055380
FOR SALE: (5) '95-'99 Z24 Rims
cool man. sounds like you're getting a good jump on your car while you're still young! Also another tip for when you're doing the corners-- It's handy to have needle nose pliers handy to pull out the pins holding the cover in place. It's awesome you have a GM guy to talk to too.
-----------
Words that you can't use in modding: Finished, Perfect, Cheap.
i know, it makes life so much easier considering he has been making the damn things since i think 1981
. If anyone ever has some question about them, that a person who puts them together would know.....let me know and ill be glad to ask him for you.
FOR SALE: (5) '95-'99 Z24 Rims
its the internet, why do you get pissed? so far as soon as someone says something you dont like, you turn into a little girl and get your panties in a bunch.
im not being a girl, people are just being stupid
FOR SALE: (5) '95-'99 Z24 Rims
just be sure not to over tighten them, they will crack
