System - Newbies Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
System
Saturday, June 25, 2005 5:09 PM
Any Ideas as to keep my radio from going out when it gets to loud

Re: System
Saturday, June 25, 2005 5:30 PM
well... is it your subs door speakers what? if it is your subs 1st thing i would do is make sure your amp isnt going into safety mode when it gets to loud.


____________________________________________________________________
Madjack wrote:Like I said before, building an engine like ours (2.2 or 2200) is a painstaking chore , since there is so few custom made parts. It's frustrating to me too, but that's what I like about doing this engine, it's the challenge.



Re: System
Saturday, June 25, 2005 6:26 PM
Gotta give us lil more info than that my friend is it a stock unit doe ya have aftermarket stereo I am guessing you do based on the "System" thing in the thread title. One thing you can check is make sure all of your connections are tight..... Sounds like if its getting to loud and something is loose you might have a loose connection someplace. Just a thought.
Re: System
Sunday, June 26, 2005 5:53 AM
also do you have the speakers bridged down at all? that usually causes decks or cheap amps to cut out


Re: System
Sunday, June 26, 2005 11:18 AM
i am not an electronic guru in any means but i live down the street in Imlay City and can give you a fresh set of ears and maybe a different perspective to help you out. send me an e-mail if interested or post back up.





Re: System
Sunday, June 26, 2005 7:51 PM
ok well it is an aftermarket cd player.
its the thing that goes out it.
it shuts its self off.
and like all my settings disappear so i have to keep reprogramming it
i just put a new battery in the car maybe i need away better one
Re: System
Monday, June 27, 2005 4:10 PM
No its not that at all.... should be a loose connection to the battery wire or the ground. how did you hook it up aftermarket adapters or did you have to cut and splice. If you had to cut and splice then start there look where you spliced the wires together. That is my guess ayway.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search