camber bishes - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
camber bishes
Wednesday, October 19, 2011 8:45 PM
push the car out of the garage and took a couple pics. now start complaining.









Edited 1 time(s). Last edited Wednesday, October 19, 2011 8:50 PM



Re: camber bishes
Wednesday, October 19, 2011 8:56 PM




Re: camber bishes
Wednesday, October 19, 2011 9:10 PM
Let's see how you did that. U get my like by the way.




______________________________________________________________________________________________
~Using nitrous is like having sex with a hot chick with an STD, you wanna hit it, but your afraid of the consequences.~
Re: camber bishes
Wednesday, October 19, 2011 9:17 PM
i approve, now lets see what you did



Re: camber bishes
Wednesday, October 19, 2011 9:20 PM
IRS anything possible



Re: camber bishes
Wednesday, October 19, 2011 9:30 PM
Air ride and irs. Everything is in my progress thread I just did not bump it. It is all still in the fabricating stages.




Re: camber bishes
Wednesday, October 19, 2011 9:33 PM
fair enough, im content with the @!#$ty trailing arms myself



Re: camber bishes
Thursday, October 20, 2011 4:05 AM
Got toe?







Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.



Re: camber bishes
Thursday, October 20, 2011 4:18 AM
Approved. I like.






Re: camber bishes
Thursday, October 20, 2011 4:19 AM
need better pics asap







RIP JESSE GERARD.....Youll always be in my thoughts and prayers...



Re: camber bishes
Thursday, October 20, 2011 5:15 AM
Jason looks good man.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: camber bishes
Thursday, October 20, 2011 5:26 AM
WOW I like it man keep up the work cant wait to see the progress pics more man lol
Re: camber bishes
Thursday, October 20, 2011 5:27 AM
Like the wheel centered.

It looks as if you have more camber and it is lower on the passenger side. ??




Re: camber bishes
Thursday, October 20, 2011 5:34 AM
Love it man










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: camber bishes
Thursday, October 20, 2011 6:39 AM
attach pics plz?





Re: camber bishes
Thursday, October 20, 2011 7:42 AM
Nice!!!




Re: camber bishes
Thursday, October 20, 2011 8:48 AM
Club Teh Jeffie wrote:Got toe?





nope not I.

The Jew wrote:need better pics asap


we will see. i only pushed the car out of the garage to work on another vehicle out of the rain. its currently back in the garage and these were taken on my phone in the rain. so i didn't try to hard. lol


ROKN20S - aka JuicyJ wrote:Like the wheel centered.

It looks as if you have more camber and it is lower on the passenger side. ??


at 0psi they actually sit back a hair. but alot better thant the twist beam. i was thinking of shortening them to make them perfect center at full drop. this will probably come after i get my struts fully figured out. because i am planning on going lower. for the passenger side sitting lower, is i think a little of the pic.


J03Y wrote:attach pics plz?


your wanting me to attach these pics? or different pics?


to everyone else- thanks. it is a slow back burner project.



Edited 1 time(s). Last edited Thursday, October 20, 2011 8:49 AM


Re: camber bishes
Thursday, October 20, 2011 10:14 AM
looks great! you restore my faith in using air struts on my IRS.
Re: camber bishes
Thursday, October 20, 2011 10:40 AM
FOR JOEY

Attachments
2011-10-19_17-30-44_764.jpg (220k)
2011-10-19_13-55-32_94.jpg (245k)


PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: camber bishes
Thursday, October 20, 2011 11:00 AM
i like!!!!



Re: camber bishes
Thursday, October 20, 2011 12:07 PM
@!#$ looks broke...

Yea I'll be that guy...



Buildin' n' Boostin for 08' - Alex Richards

Re: camber bishes
Thursday, October 20, 2011 4:06 PM
Joe Schulte wrote:Nice!!!


Joe Schulte wrote:I was about to give props, then I saw the rear camber shot. Ruined it for me. Was hopeful.


Consider myself, confused.



Thompson, car looks great... headed in the right direction.
Re: camber bishes
Thursday, October 20, 2011 4:26 PM
Jeff Wybrow wrote:
Joe Schulte wrote:Nice!!!


Joe Schulte wrote:I was about to give props, then I saw the rear camber shot. Ruined it for me. Was hopeful.


Consider myself, confused.



Thompson, car looks great... headed in the right direction.

This car is running an actual IRS setup and is on air.

AKA he didn't shim his static dropped car, still confused?




Re: camber bishes
Thursday, October 20, 2011 4:55 PM
your camber makes me happy is that as far down as it goes?
Re: camber bishes
Thursday, October 20, 2011 5:20 PM
proof of concept works for me.

been toying with the IRS and air idea for a while now, you may gave just convinced me...



** FOR SALE** http://www.j-body.org/forums/read.php?f=24&i=110879&t=110879
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search