The car looks great, don't even need to do anything else to the exterior!
Perfect! Love those rims!
looks like your missing the front lip. pull the side moldings and the front and rear emblems and it'll be mint!
other than that, car looks great!
looks good. you dont see many like that around.
I would get the front lip. looks goofy with out it ..
thanks for all the comments, and for the front lip it didnt have one when i bought it sadly, but i'll be pulling it off the road in the fall and i'll be getting the front lip from west wing and i'll be putting carbon fiber hood and trunk so the badges will be gone
well rounded so far. keep up the good work.
I feel like taking a tinkle on an ecNOtec...
So i stored my mistress for the winter to keep the girl nice a clean......got working on her over the last couple weeks to discover a little problem
I took the whole front end apart to see that my lower rad suport on the drivers side was effed up pretty good, and notice that one of my frame suports that were going down to the lower rad suport on the drive's side was crunched up. Not a clue what the hell happened but its a bummer to find. Also i took the intake manifold off to discover that my intake side valve cover gasket has been leaking oil down the side of the engine
Started to look under the vehicle to relize (thank god) nothing is wrong under there, no rot anywhere or even rust at all
other then that i've taken the side skirts off and the whole rear end ( bumper, and rear bumper frame suport, trunk, tail lights) and I went to my local Canadian tire and bought myself a couple cans of rocker gaurd and sprayed the rear end of the car and rockers on both sides and the inside of the doors and i'm slowly working on the inner fenders in both the front and rear of the car, got some pictures of the work.... Sorry for the crappy pictures there off my cell phone
rad suport at the driver side
frame on driver side running up and down at the front of the vehicle
front end
intake at the middle intake
Thats been hit pretty hard. I would be taking it to a shop to get that pulled out properly.
that looks like some ones car on this forum for some reason lol ... i wouldn't change a nothing on the exterior
looks good man, this excact car was in the junkyard i was at the other day cept it was black. it didn't have a front lip either. sedans ftw :]
Thumbs up for 4 door Z24s
Corey Piper wrote:looks good man, this excact car was in the junkyard i was at the other day cept it was black. it didn't have a front lip either. sedans ftw :]
where you from ? ontario ? say barrie area ?
doesnt look like it was hit but more like prior owner musta bottomed out hard or hit a curb cause of where the damage is and consintrated. also i see that its missing the front lip. also that it doesnt even have the holes for the lip and that the fog lamp surrounds are red and not grey. leads to a replacement bumper pushing my theory to the damage. it seems may of been a outta pocket quick fix,
Looks amazing other than the hidden damages found. I LOOOOVE those rims man with the drop.
A buddy who i work with got a z24 4 door that is absolutely gorgeous. Ill probably be giving him my front and rear strut bars and CAI. Ill have to take pics of it sometime.
GTmatters wrote:Looks amazing other than the hidden damages found. I LOOOOVE those rims man with the drop.
A buddy who i work with got a z24 4 door that is absolutely gorgeous. Ill probably be giving him my front and rear strut bars and CAI. Ill have to take pics of it sometime.
thanks man, i just picked up the front lip to complete the skirt package but for ovious reasons I havent put it on the front bumper, i've got my whole front end apart to fix my frame issue's, and now I've discovered the passenger side is just as bad as the driver side frame since i removed the ECU......FML
ANY1 HAVE SOME HELPFUL TIPS ON FIXING MY FRAME ISSUE IT'S BE GREATLY APPEREATIED.....I'VE GOT THE PIECES OF MATERIAL I NEED TO WELD IN I JUST A IDEA TO PLUG MY RAD HOSE'S TO KEEP FLUID IN THE MOTOR SO MY MISTRESS DOESNT FREEZE OR SIEZE,AND I JEED TO TAKE THE AC CONDENSER OFF BUT TO BE HONEST I'VE NEVER DONE AC ON ANY VEHICLE SO ANY1 WITH ANY HELPFUL TIPS THAT'D BE GREAT.....HELL IF ANY1 LIVES CLOSE TO THE HELP WOULD BE GREAT ASWELL JUST MESSAGE ME I LIVE IN BARRIE ONTARIO
sell it to me?.. lol we re not too far away.
nice car, good luck getting er fixed up.
You doing the welding yourself?
GTmatters wrote:You doing the welding yourself?
thinking about it but i havent done any solid welding in the last 2 years so my buddies dad has been welding for years and i'm thinking a case of beer will win him over
