oops forgot to write something, damn no edit button...
i had this idea going through my head sense i ever seen the TYC tail lights. so i found and bought a set of them and went out and got amber LED for the turns and red LED for the running/ brake lights to do like the yota tails for a cav, turned out pretty good.
comments welcome
13.22 @ 105.2
Spiffy like looks like something I would do.
I <3 JGM
I think bigfoot is blurry,
that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra
scary to me. There's a large, out-of-focus monster, roaming the countryside.
"Run! He's fuzzy!" "Get outta here!"
In Loving Memory of Phil Martin December 14 2005
2.5" amber LED for the flasher and 4" red LED for the brake, i did the yota cav light wiring...
-cut the white wire at the switch
-the white from the brake and the ground from the signal go to the black from the car (both sides)
-the red from the brake gets its feed from the 3rd brake light, then go from the L tail to the R tail.
-the + wire from the flasher goes to the yellow wire on the L and green wire on the R
-then last wire is the running light, black wire that goes to the brown on each side
13.22 @ 105.2
It's not driving now lol. So no washing for it.
Looks good Jean
M62, 42's, ZZP 3", ZZP S3 H/E
214whp 190wtq
Hmmm... like the idea... just not quite the look... maybe paint the housing body color?
i may nite shade them 1 or 2 shades... deff not taking them appart again to re paint the housing lol
13.22 @ 105.2
They oddly remind me of Scion tC tails. I like them though.
TheSundownFire (GME Chat) wrote:They need tinted.
agreed, im prob doing 1 or 2 coats
13.22 @ 105.2
they look good man i agree i think a couple light coats of nightshade and some clear would help tie everything together...
