mmmmmmmmmm.........polished valve cover! nice work looks good, now get it installed
Looks good but you can probabally do better than that, start with like 1000 grit get all the scratches and gouges out of it, then go to 2000 over it complete, then get a buffing wheel and go at it with mothers aluminum polish.
___________________________________________________________________
I started with the 400 grit then to 600 and 800. Stoppped at 800 cause i had to put it bck on the car. This weekend i plan on taking it back off and hitting it with the 1000 and 1500. That should do the trick.
this is what it looked like before i took it out of the car
they never look as good in pics as they do in person
04ps wrote:I started with the 400 grit then to 600 and 800. Stoppped at 800 cause i had to put it bck on the car. This weekend i plan on taking it back off and hitting it with the 1000 and 1500. That should do the trick.
this is what it looked like before i took it out of the car
wtf did you remove the pcv hose for a red filter?!
Darkstars wrote:they never look as good in pics as they do in person
Ain't that the truth!
Looking good though and should look great after this weekend...post up more pics when done!
Eh...old man with a Corvette now...it was bound to happen sooner rather than later right?
polished valve covers look soo good on the ecotec.
next do the fuel rail....
I agree ditch the red breather filter.
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
just finished mine and about to put up a how-to
Kill list:03 eclipse, 06 GTO, 04 Mach 1 Mustang
nah........think i'll leave the filter on a lil bit longer. just for show. here it is back in the car til this weekend.
the cover looks good but your engine bay looks like ass
looks good
but a powdercoated black one would be better......as long as i doesnt seize the engine...(lol at QBE)
I may run 18s, but I can do your taxes in 10 seconds flat.
I'll probably end up powder coating the fuel rail instead of polishing it. thanks for the comments.
im with darkstars haha POLISH THE FUEL RAIL!!!!!!!! you know i would
The one, the only, ME.
04ps wrote:nah........think i'll leave the filter on a lil bit longer. just for show. here it is back in the car til this weekend.
for show?! it looks like ass. removing it would eb an upgrade!
Nice job on the cam cover though, dont forget to to check for oil leaks around the seal after the final install though.
