well i finally finsihed all the body mods and fixing everything dents scratches, molding, shaving and so on
primed the entire car an preped it for paint still needs to be sanded 600 grit but its pretty much done ready for paint
let me know what you guys think of the over all look of the car
and let me know what you guys would do to change it or your feelings on it good or bad










thanks for looking



www.cardomain.com/id/krazycav

nice bodywork man. Keep it up





"All my life I have been trying to figure out who is behind this face of mine"

looks good man

agree...great job!! The kit looks uber sweet molded in!! Keep up the great work and can't wait to see it painted!




Eh...old man with a Corvette now...it was bound to happen sooner rather than later right?

Love the car and bodywork. The only thing I would change and i see it as more of another mod is the gas lid. I would change it to a stainless steel round ones....that body work would be minor compared to what you have done recently and i think the end result would be very sharp!!!!!!!!

looks awsome. great job

looks great man, just throw some mesh in the front after it's painted, slam it, and you're good to go

I thought you were selling it?


JUST ADD PAINT!! LOVE THE EYELIDS!


NICE freakin work!


Hey post some pics of the other cavy back there.







"Remember do what you like because you have to drive it."--Me

very nice

looks good, I don't like how the front end is molded into the fender, but thats just me.

Sand down that arrowhead in front, or whats left of it atleast and your good to go.




Thanks,

Big-L (Luc)
'04 Sunfire SL
http://www.totalsportcompact.com
Ottawa's premier car and lifestyle event!

I would put the fenders back to stock.. paint it and drive it.. sell that thing in the backround with the nasty idenity crisis..




POLYFIBER kits $375 (BMX, BC2, Blitz, Drift, KMAX) * CRACKED DASH? CLICK HERE!!

Both cars have a lot of work into them, can't wait to see both of them painted and put back together. Good job!


<IMG SRC="http://registry.gmenthusiast.com/images/imp0rtfighter/personal_pic.jpg">
*TEAM GMCI RACING* * MY CARDOMAIN PAGE *

damn those srt4 whels look aweosme on there. i actually like the work good job man


<img src="http://www.jbody.org/registry/compactcavalier/personal_pic.jpg">

COMPACT CAVALIER

awesome!!

keep up the work!!

looks like your off to a real good start keep us updated!





My car was made with wrenches, Not chopsticks.

Looks good and you do awesome work. Keep it up! I can't wait to let you to shave my trunk!

I just had my seats installed! So let u know!



- Darren

<a><a href="http://phewes.snowpants.org" target="_blank">
<img border="0" src="http://phewes.snowpants.org/future.jpg" alt="get off my sig!"></a>
Official member of <a target="_blank" href="http://www.ontariocavs.com" style="text-decoration: none">OntarioCAVS.COM

just like how mine sits now, straight primer the only thing i dont like is the fenders. questions too, why didnt you shave the gas door while you did all the body work? its so easy and would go so well with all the smooth body lines you have.

That looks excellent!!

I hate aftermarket fenders but I didn't realize that those fenders actually go w/ the bc2 back. In the first picture you can tell that the slit in the bumper and the slit in the fender are almost identical.

I absolutely LOVE everything about the car after I spotted that because the fenders actually look like they're supposed to be there in a way. The wheels look good, BUT since your car is fully kitted and molded and pretty extreme-- you DO need bigger wheels IMO.

&, like one person suggested, DEFINITELY change the gas door *no questions about it* to an aluminum one: Tiburon, Eclipse, Sparco, etc.

I cannot wait to see it painted!!!




<a href=http://www.cardomain.com/profile/ky_cavygirl><img src="http://img.photobucket.com/albums/v365/samistumbo/cavy_girl.jpg" alt="It'll getcha drunk!" border=4 id="myimage"></a>
Member of <a href=http://www.jbok.org>J-body of Kentucky</a> <img src="http://i6.photobucket.com/albums/y241/samanthastumbo/idhitit.gif" alt="Image hosted by Photobucket.com">

u do some sick bodywork good job!!


Moms & Dads talk to your kids,before its too late,tell them to say no to aluminum wings.

nice

I agree on the relocation of the gas filler, or at least the round stainless on that OEM is kikkin it.
Other than that I just say shave the handles but Im guessing you dont want to sience you didnt already So maybe a Handle conversion? I think something like the XLR handles would OWN.

only this i woulda don diff....lose the spoiler...other than that its hawt




Not unintentionally accelerating since 2009!!!!

Looks badass man nice job.

Looks wicked! I dont love the drift front molded so muhc, but thats not jsut your car, its any car.
And what happened to the window on the other one?



<img src="http://www.j-body.org/registry/thadog/MAT.jpg">
"Louis, you better watch who you call a child. Because if I'm a child,
that makes you a pedafile, and I'm not gonna stand here and argue
with a pervert" -- Peter Griffin

Phewes wrote:Looks good and you do awesome work. Keep it up! I can't wait to let you to shave my trunk!
I just had my seats installed! So let u know!

lol any time man just let me know when your ready
i need to take a look at your seats as well to see how to do mine

OneBadZ24 wrote:why didnt you shave the gas door while you did all the body work? its so easy and would go so well with all the smooth body lines you have.

i didnt know how to move the gas pipe so i just left it i searched forever but couldnt find anything on how to do it so i just kept it stock only thing pretty much stock

KandyMan...Das Deutsche. wrote:only this i woulda don diff....lose the spoiler...other than that its hawt

thanks man
i kept the spoiler only to be difrent everyone shaves them so i desided to mold it
it gives the car a like touch i think doesnt leave the rear to bare



www.cardomain.com/id/krazycav