Thats right I got board and decided to take it out on my headlights.
i also filled the three little holes that hold the side reflector on, alot of people that do this dont fill those for some reason but im glad i did cause i think it looks alot better.
let me know what you think
oh and i know my car is dirty!
hehe, i notice the 194 led bulbs
we put those in my room mates 03 the other day
I like the red paint you did on the inside of the housing... looks tight son
My Sunfire
that looks sweet
i would like to try that, but i dont trust myself taking apart my perfectly good lights hehe
thanks guys
hey phlatcav have you guys figured out what thoes do yet i havent ever seen my LEDS work?
jnickel just do what i did i went to ebay and bought some used headlights and make these.
these are olny temporary because im going to build a set of projectors for my HID's i got the other day
thanks for the comments
is there a how to on this? i want to do this as well
no but i will make you one so check back about 12:30.
yo streaker how tha hell did you get those headlight covers off????????????
itz not what u drive, itz what drives u
ok this is a quickie
1. Remove the headlight from the car and remove the bulbs and everything else you can.
2. pre heat your household oven to 150 and when its done put your light in the oven for 8 min and then check to make sure nothings on fire. (I did mine at 180 for 10 min and it worked great)
3. after you remove it from the oven take a flat head screw driver or 2 and lift the clips that hold the clear plastic on so that they are not cliped anymore. ( BE CAREFUL THEY ARE VERY FRAGILE!!!!!!) then place it back in the overn for about 5 min. and then use the screw drivers to seprate the glass from the headlight. just insert the flathead between the clear part and the head light and twist.(again be careful because it is soft) make sure when your doing this that the clips you lifted off didnt clip back on.
4. After you get a good portion of the clear cover off stick your hand in there and pull it apart.( again be careful!)
5. common sence will set in and you can figure out how to clear the corner you dont need help fig. that out.
6. make sure you scrape all the rubber sealer off so you can get a better seal when you reseal it.
7. i used clear silicone to reseal them.
hope that helps if you have any qusetions let me know.
your car is dirty? ur parked in the car wash
car looks good
Streaker1369 wrote:no but i will make you one so check back about 12:30.
hahaahah thats funny cause then your next post was at
2:30 pm
GOT ECOTEC?
post time is displayed in whatever time zone u selected, so yes.,...2:30 your time would have been right
Nice work man! Looks hot and original which is always good in my book. I also give you credit on posting the how to in the time period you said you would. Very cool
thanks again everyone.
and again if anyone has questions let me know.
Awesome. Nice to see more people ripping their sh!t apart and making a good result.
<img src="http://registry.gmenthusiast.com/images/mattsrad/sig.gif"><img src="http://www.houston-imports.com/forums/images/smilies/headbang.gif">
looks good i remember doing mine .. i was one of the first to do it and i had posted the how to after the 03 bash and now an so many people are doing it and it really sets off the cars i put in hyper white in my headlights and turns and green 194 bulb in there now my car is wrecked but its alright you can see my car in my page on here im now working on my 04 f150 but most the stuff i did lives on in my friends 04 cavalier hes got my hood / springs / headlights / strobes amonst other things. i painted my plastic piece light green metallic pearl. check out the pics in my gallery.
Now owns a 2006 cobalt ss supercharged
im still wondering if anyone knows what the corner bulbs do? i have never seen my leds work. but i know the bulbs are good cause i took them out and tested them.
