I am currently in the process of converting my 96 to an 01. I have converted the entire wiring harness. I was just about to put the plastic dash piece on when I realized I can not find where a certain plug goes. It comes right from the fire wall. It is a purple and I believe yellow plug. It has thick wires going to it. It is a 10 to 12 gauge wire. I am unsure about the certain color will look for sure tomorrow. But was wodnering if anyone had a clue..
Thanks in advance.....
http://registry.gmenthusiast.com/images/importkilla32/Bullit.JPG
Airbag?
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
only yellow i can think of is airbag.
pic of the plug possibly?
maybe somethin to do with the cluster ? ...
I can't get the camera to work. I will try to get something this weekend. The connector is not yellow it is black. The wires if I can remember are purple and yellow. They are a lot thicker that most of the other interior wires. 12 gauge I believe. The wires come right from the firewall. and doesn't want to reach to far.
http://registry.gmenthusiast.com/images/importkilla32/Bullit.JPG
This might not help much, but I used to work at a plant called, "A.I. Belvidere" out here in Belvidere, IL. Here we used to assemble the Powertrains and Instrument Panels (Dashboards) for the Dodge Calibur, Jeep Compass and Jeep Commander. The Dodge Calibur I think uses the same Wiring harness as the P.T. Cruisers do. I think, dont quote me on that, but the case and point being is that its alot cheaper and more effective for companies to train their employees to build one or two types of wiring harness to decrease the chances of defects rearing their ugly little heads. So those additional plugs may just be dummy plugs.
The only thing i can think of at the moment is that It sounds like the wires and plug that go to the clutch safety sensor
