1. The plastic piece seatbelt guide on the top rear back rest on each corner (2)?
2. The e-z entry knob located on the back of the front seats on the 2-door model?
I would check myself, but I'm affraid to break something and so I wanted to get some expert opinions on this.
>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----
funy cuz i wanna ditch mine as well . i know with the 1 gen Escorts you had to baicly undress the seat and then there were 2 metal clips that held the headrest from coming out all the way , when you moved them the rest would pop out completely
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
That's pretty much the same as a Cavy/Fire. But you just tug at the fabric right in front of the headrest bars and you can see them. Use some kind of angled pick to pry the pins out. Then remove the plastic nuts holding them to the headrests.
If it can't drag, it ain't low enough!
on mine seems like theres a washerto hold the rest in cuz if i try to pull it up the fabric trys to come with it .
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
the knob to flip the seat forward is not a fun thing to remove.....
when my car was still under warranty, something broke inside the seat back, they had to send it to a re-upholstery shop.......the re-upholstery shop just broke it off, and glued it back on. I never got it properly fixed....the dealer refused to do any more for it.
I have the knob in my cup holder, I will try to throw a pic of it up so you can see if there is a way to properly remove it.
this is what we want to remove
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
what year is your cav ? i dont have that on mine
ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500
mr goodwench: they just pop out. buthtere's a hole left in the shape of the mount (you can see the shape of it in the molding, its fairly ovaloid.) as for the thing on the back of the front seats: i had no idea thats what they were for. if i want my seats to tilt forward, i just push them.
JBO Stickers! Get yours today!
JokerAKA Showoff03LS wrote:what year is your cav ? i dont have that on mine
It's a Sunfire, 2002 m/y. I don't remember if my 1996 Sunfire had it too.
Rich Grayo Jr. wrote:mr goodwench: they just pop out. buthtere's a hole left in the shape of the mount (you can see the shape of it in the molding, its fairly ovaloid.) as for the thing on the back of the front seats: i had no idea thats what they were for. if i want my seats to tilt forward, i just push them.
Are these piece held up by pressure? Like snapped on?
Mr.Goodwrench-G.T. wrote:
John Benham wrote:
I have the knob in my cup holder, I will try to throw a pic of it up so you can see if there is a way to properly remove it.
Yes, please do.
>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----
there's a white plactic donut on the other side of the fabric. looks like the belt strap, but it doesnt have the hook, and it has a hole in the middle.
JBO Stickers! Get yours today!
damn it....I took pics, but keep forgetting to upload them.
Ill get them up asap.
look who FINALLY remembered to upload pics.
As you can see, the knob has a hole that faces the inside of the passenger compartment that a small set screw (i am guessing) goes through that and the matching hole on the lever bracket.
- Attachments
- seat pin.jpg (446k)
and apparently I can only attach 1 pic at a time.....
- Attachments
- seat pin 2.jpg (467k)
