Does anyone make them?
If not I'm gonna make my own custom ones that would be the best looking display.
are you looking to replace your whole cluster with digital gauges? check out www.dakotadigital.com ... pricey, but most likely the best solution.
anyone have pics of the dakota setup in a 95-99 gauge cluster?
"sometimes the respect is more important..."
Just finished assembling this about 20 minutes ago
Kardain how was the assembly? did you just cut a new piece to cover the old gauge face or how exactly did you do that. i really love the look of digital gauges and am really thinking about doing it. i am decent with electrical but not exactly the electrical in the j body so i may just order the dakota ones.
"sometimes the respect is more important..."
Cut a piece of aluminum the same shape as the trim piece, cut all the idiot light pieces out of the backing plate, measured and drilled all the mounting spots for the gauges
the circuit board and old gauge face are history.
Dont mind the mess
:
cyberdyne gauges FTW. The install was very easy as long as you follow the wiring properly.
There are a few other .org members that have done this as well. Gary (John 317) and Brad (Doublezed) are two I can think of at the top of my head.
you can get pretty much any type of gauge on the market in digital form now.
OMG POPPA
Is that all Fibreglassed? It's BEAUTIFUL!
Buddy Club Ecotec Cavalier
* More to come *
big poppa that is gorgeous!!
"sometimes the respect is more important..."
Quote:
no fiberglass he actually carved that out of a redwood tree.
Yup...carving that dash from a red wood was a PITA
It is all fiberglassed, I finished building it a little while ago now, I just haven't cleaned up the interior yet...I'm trying to finish the widebody work before I finish up the interior right now.
^ lol thanks man.
I've decided to go crazy on the interior as well...I guess you could say I'm going out with a bang.
^^I'd consider it, but these aren't plug 'n play
does look good though Rob. keep up the good work.
Desert Tuners
“When you come across a big kettle of crazy, it’s best not to stir it.”
Kardain what all gauges are in ur cluster now?
"sometimes the respect is more important..."
Water temp, tach, speedo, fuel in the cluster (from left to right)
On the pillar: volt, A/F, oil pressure (top down)
the last one, air temp, I'll probably thread into the intake for an IAT reading.
Only dash indicators I have are l/r turn, high beam, e-brake, and check engine
sndsgood wrote:Jay Corkum wrote:OMG POPPA
Is that all Fibreglassed? It's BEAUTIFUL!
no fiberglass he actually carved that out of a redwood tree. 
Redwood, I would have said bluewood atleast, dun dun dunnnnnnn.
Anyways, on with my browsing.
----------------------------
Quik, I'd love to have one.
just money is an issue right now. maybe during next year's tax season.
Desert Tuners
“When you come across a big kettle of crazy, it’s best not to stir it.”
