So i want to put some recaros in my 04 cavalier and i didn't know if there are brackets. I am getting some used recaros without the bracket and i would like to save money and not buy a universal bracket. Can i fabricate my seat bracket i have in my car to fit the new seats?

you can have someone modify your factory brackets to fit if they or you have welding skills



Modding my j since I found the org

im actually gonna do a right up on this when I switch my apc seats out to my sparco I made both brackets for 560 bucks

560 bucks for brackets?

Chris Gatti wrote:im actually gonna do a right up on this when I switch my apc seats out to my sparco I made both brackets for 560 bucks

you know that Sparco sells brackets to fit their seats and drop into a cavalier with no modding for less than half what you paid, right?

I sincerely hope that was a type.

haha I paid $20 for materials and made my own brackets and they are 100 percent safe

"As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen

Andy's Auto sport has a lot of brackets for different model seats.
I think recaro was one.
http://www.andysautosport.com/racing_seats/chevrolet_cavalier.html

J03Y wrote:

Chris Gatti wrote:im actually gonna do a right up on this when I switch my apc seats out to my sparco I made both brackets for 560 bucks

you know that Sparco sells brackets to fit their seats and drop into a cavalier with no modding for less than half what you paid, right?

I sincerely hope that was a type.

yes a big one lol 50 for both haha my mistake sorry sorry haven't made the wright up will get on it after the holidays :/

Ok I was gonna say, I made mine for about 40 bucks to fit my sparco's lol

VTLoki wrote:Andy's Auto sport has a lot of brackets for different model seats.
I think recaro was one.
http://www.andysautosport.com/racing_seats/chevrolet_cavalier.html

they do but I don't like how high the seats sit I like my seats low . and I did mine at 1/2 the cost but if you don't wanna spend the time making em here's their link to the adapters

http://www.andysautosport.com/chevrolet/2003_9999_cavalier/interior/seats/seat_bracket/sparco/

sparco makes a universal that fits any car too

The reason that I did not go with pre made brackets , is because I am tall and I thought that I might sit too high for them, so I made custom ones that let me not be at the headliner....