I know a lot of us have aftermarket seats, and some of us want 3,4 or even 5 point harnesses. As you know just hooking up the rear to the rear seatbelt bolts is not the right way to do it and could really mess you up or kill you if you were in an accident. The proper way of course is to use a harness bar, whether it's standalone or in a cage. I'm gaging interest in one specifically made for our cars by our friends at OEM.
Let's start up a list, I'm sure OEM will chime in as well as to materials and pictures of it once we get some interest.
1. lanman31337
1. lanman31337
2. j_a_c_k_s_o_n - interested in price, finish, and cost of shipping to Ontario Canada
1. lanman31337
2. j_a_c_k_s_o_n - interested in price, finish, and cost of shipping to Ontario Canada
3. Mike- Price, Finish.
I know OEM has done aluminum, and I do believe he can powdercoat as well.
1. lanman31337
2. j_a_c_k_s_o_n - interested in price, finish, and cost of shipping to Ontario Canada
3. Mike- Price, Finish.
4. Onecleancavy-Kris- Interested in price and shipping to Calgary, Canada as well
"Straight roads are for fast cars, turns are for fast drivers"-Colin McRae
I'm going to give some input on the harness bar, I owned the one that RD Fabs offers and it fit great in my 2001 base with stock seats, once I got around to installing my leather racing buckets I couldn't use the bar ( the vertical supports interfered with the sides of the seats). I then sold my RD Fabs bar to Darkstars for use in the GTC and It wouldn't fit in his car at all. I think he had an entire thread on it as well....
Read me.
So if this goes through make sure you try it on 95-99, 00-02 and 03-05 just to play it safe. i personally wouldn't buy one not knowing if it would clear my tenzo R seats ahead of time.
1. lanman31337
2. j_a_c_k_s_o_n - interested in price, finish, and cost of shipping to Ontario Canada
3. Mike- Price, Finish.
4. Onecleancavy-Kris- Interested in price and shipping to Calgary, Canada as well
5. baggedNINE7 - interested in price and finish.
I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!
JUCNBST wrote:I'm going to give some input on the harness bar, I owned the one that RD Fabs offers and it fit great in my 2001 base with stock seats, once I got around to installing my leather racing buckets I couldn't use the bar ( the vertical supports interfered with the sides of the seats). I then sold my RD Fabs bar to Darkstars for use in the GTC and It wouldn't fit in his car at all. I think he had an entire thread on it as well....Read me.
So if this goes through make sure you try it on 95-99, 00-02 and 03-05 just to play it safe. i personally wouldn't buy one not knowing if it would clear my tenzo R seats ahead of time.
Very good point, then the next question is sunfire vs cavalier. We have enough people who can measure bolt to bolt for the b pillar.
Can you do anything about an add-on camera mount for those who record in-car vids? For autox, drag etc..
I was making one but lost motivation seeing that I haven't even gotten out once yet this year..
Just thinking out loud here..
That's a great idea. It would be just a ledge with a hole in it so you can bolt your camera from the bottom?
Exactly, The one I was making mounted to the seat belt bolts and gave a good view unlike most of the vids I have seen where half of the screen is staring at the dash.
Figured it would be an easy add-on if someone wanted this option..
It would, and you could probably specify where you wanted it, or even multiple points.
1. lanman31337
2. j_a_c_k_s_o_n - interested in price, finish, and cost of shipping to Ontario Canada
3. Mike- Price, Centered camera mount if possible.
4. Onecleancavy-Kris- Interested in price and shipping to Calgary, Canada as well
5. baggedNINE7 - interested in price and finish.
1. lanman31337
2. j_a_c_k_s_o_n - interested in price, finish, and cost of shipping to Ontario Canada
3. Mike- Price, Centered camera mount if possible.
4. Onecleancavy-Kris- Interested in price and shipping to Calgary, Canada as well
5. baggedNINE7 - interested in price and finish.
6. RKCavy - interested in price, finish, shipping to 48809
Now With More Carbon Fiber!
Mike - you didn't add yourself to the list :~
I'm # 3, Been on since I first saw it
Unless there is a different one only cool people know about
Depending on what it looks like and what colors are available.
1. lanman31337
2. j_a_c_k_s_o_n - interested in price, finish, and cost of shipping to Ontario Canada
3. Mike- Price, Centered camera mount if possible.
4. Onecleancavy-Kris- Interested in price and shipping to Calgary, Canada as well
5. baggedNINE7 - interested in price and finish.
6. RKCavy - interested in price, finish, shipping to 48809
7. WHITECAVY- ZIP 43082 OHIO
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Correct. A bar to go across the B pillar where the seatbelt bolts up to, and then two bars with pivot links to connect to the bottom seat belt bolt. Then there's some sort of unit to keep the belt from sliding left and right when its on the bar.
Something just like this:
Edited 2 time(s). Last edited Monday, May 18, 2009 11:40 AM
subscribed and you can use my car for testing 03-05
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
Looks like price wise would run $200 for non powdered and $275 powdered. For the shipping domestic would be $0 and international would be $40. Let me know if this will work and i can get on them pretty soon.
Mark-OEM
Edited 1 time(s). Last edited Tuesday, May 19, 2009 9:30 AM
http://www.overkillengineeringmotorsports.com/
Hmmmmm Id be interested in seeing these done I could some place to mount a camera on track days
JGM T-SHIRTS!!!!
In Loving Memory of Phil Martin December 14 2005
Alexis: Dustin, you're ghey, lol. I am better. I have tits, and tits rule all.
Ima save up and take one for the team. I've heard his work is damn good, shouldn't take me long to get the money together.
