well i had a lil free time this weekend so i decided to paint my stock z24 rims. here is how they came out, didnt get too many pics but here they are. i also decided to put them on because the ride is hard with the 19's lol

stock ↓

1st coat of paint ↓

2nd coat of paint ↓

2nd coat of clear ↓

3rd coat of clear ↓

and on the car obviously lol ↓

and again ↓


i didnt get any pics of the cleaning or sanding cus i was on and off doing this and mowing the lawn on our 2 acres lol
the center caps are in my room waiting to get painted also lol ima do the chevy sign insert in red
i know i needed to clean the tires and put some air but i just took the pics before i did, ill try and get some tomorrow after school if i have time to wash the car completely
i used 2 cans of duplicolor primer sealer, 4 cans of rustoleum wheel coating ( the can said it was flat black but it ended up being glossy) and 2 cans of rustoleum clear wheel coating also used 180, 320, and 1000 grit sand paper and some index cards. overall i like the way they came out

wow someone actually painted the inside of the wheel . lol looks good though

lol yea i like the black on black look and it rides way waaaaaaaay better with these than the other rims so im good with that

run a 225 or 235 on your 19s.. and it will be like nite and day.

but arent the tires still too short (like in hight) cus they are 35's so wouldnt it still be a hard ride?

225 and 235s wider and more meat . my 215s on my adrs are a nite and day to my 225s currently

I run a 235/35 on my 19's rides much better then the 225/35's but it is a close fit.


I <3 JGM
I think bigfoot is blurry,
that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra
scary to me. There's a large, out-of-focus monster, roaming the countryside.
"Run! He's fuzzy!" "Get outta here!"

In Loving Memory of Phil Martin December 14 2005