Hey guys.

Look, i've done some researching. The ONLY bolt pattern I have found for this 1994 Z24 is 5x100. I bought some Focal F6's with the universal 10-bolt pattern. I checked four websites, and they all said the universal 5x100 would fit the 94 Z24.

Problem: they don't fit.

I measured it myself, and it's 5x95. I swear. You can't say someone changed the rotors/etc, because it's the STOCK Z24 rim on the car.

Have ANY of you heard about this? A buddy of mine swears up and down that his 93 z24 is 5x100. Apparently, this 94 z24 is 5x95. I have a 93 Z24 in a junkyard I can swap everything off of for free; but I just kind of wanted an answer before I go all the way out there and remove it, and swap them.

Thanks in advance.

I'll post a picture if it helps. It's the RED Z24 in the picture. The silver one is mine. Thanks guyS!




http://www.cardomain.com/ride/2508821

Delete this post. My boy measured it wrong; I didn't believe there was a 5x95, and I'm just going to make it fit tomorrow. If it's truly universal, it will fit. Sorry for the waste of a thread.


http://www.cardomain.com/ride/2508821