I've sent them 2 e-mails and tried calling them directly once. All i am trying to figure out is the damn Hub bore size so i can order my freaking hubcentric rings and they are being pains in the asses.
I have a hunch its 73mm but i am not 100% sure. Anyone with motegi wheels and ordered hub rings back that up?
thanks in advance.
Most of the aftermarket wheels out there have a 73mm hub bore. If all else fails, contact tires.com and ask them, because they can find out for you.
I'm in the same boat at the moment. Can't find exact sized rings for what people say the motegi outer diameter is. Its listed alot of places, cavalier inner = 57.1mm // motegi outer = 73.1mm...and whats funny is the two local auto places in town say those sizes don't exist and they come in 58i 74o. Either e-bay bidders are just bsing by a millimeter on the size, or nappa and lakeland auto parts are full of $hit. Sizes are for motegi ff7's btw.
call 1-866-4-motegi talk to a tech person......they should tell you rather quickly. hope that helps.
ClassGlass / RkSport / Eibach / Motegi / Ractive / Borla / K&N
OK since I just got mine in the mail as a set with my wheels today ( a good choice since you know theyll fit guaranteed hehe) heres a pic you may find helpful. The rings fit like a glove on the wheel
not too snug, so I'm guessing 73 will be a tight fit but ok.
info you probably want:
ring in the wheel & seated:
the money shot...
and for anyone who cares I checked them all out, one ring was abit off-round which explains the low outer reading..should be .85 not .82 :/ both pics from the off-round ring hahaha.
inner:
outer:
for those who dont use calipers, (inner size example) this ones green outer ring is % of 1", so (2 + .25)*(25.4mm/inch) ~ 57.1mm
Screw nappa and the local auto places, they don't know jack and can only order from their catalogs
calling the company would be your best bet if these sizes arent what you're lookin for.
My part # ended up being HR-705710.. my hubs bore is in fact 70.1mm for my Motegi DPK's... I think the reason for the difference is I'm guessing because its not 10 lug universal. Its direct 5x100 and which these cars have smaller stock hubs in general. I got Pepboys to order me the set and only cost me $9 bucks while i was going to pay something like $18 thru jegs. Mine are nice and snug, no room to wiggle and i have no wheel vibrations up to 75mph. Which is all i have been able to get up to on my local roads. So thanks for your guys help, the thread can die now.
