Any interest in Performance Clutch 2000-2002 2.2L OHV Engine???
KY Performance is willing to make these if we have interest...
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Heck it'd probably be the same price as a stock replacement. The stockers are priced ridiculously high for those motors. Unfortunately, I would have been interested before but unloaded my ln2 for an eco car.
"In Oldskool we trust"
Turbo tech if you guys sell them for the 2.4 than you can also use them on ln2, same size pressure plate but 1/2 wider clutch disc. just put my 2.4 getrag clutch on my 98 grand am that I used ln2 getrag to swap to manual and works
FuzzMASTA9
i AM interested still, just poor cause I just got married lol.
"A car just isn't a car without a little blood, sweat, and beers." -- Shadowfire
Will they be complete garbage and slip all the time like my clutch has been for the Ecotec???
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
I love my ky clutch so far.
I also love the fact that you can contact them directly and they will make you a clutch for your own needs.
FU Tuning
Well I have over 500 miles break in on my 2nd clutch from them and it still slips under a load. New flywheel and everything installed. I should have just thrown another ACT disc on my stock pressure plate. Never had any problems with it.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
Roofy wrote:Well I have over 500 miles break in on my 2nd clutch from them and it still slips under a load. New flywheel and everything installed. I should have just thrown another ACT disc on my stock pressure plate. Never had any problems with it.
I would speak directly with them (not saying anything bad about TTR), but I have a friend who contacted them directly. Sent his Spec clutch, and flywheel. They tested it and redid the clutch disc and resurfaced the flywheel with a new TOB for $200 that included the shipping back, he paid the shipping to them.
How many puck did you go with?
Edited 1 time(s). Last edited Sunday, October 20, 2013 6:45 PM
FU Tuning
Oh I'm not blaming TTR at all. Aaron did great getting me the clutch with overnight shipping and everything. He definitely went above and beyond. Nothing but good things to say about his service. I'm upset about the fact that I spent over $600 on what amounts to a ceramic 6-puck disc with a Chinese/Korean cheap spray painted stock pressure plate. And to have the same problem with it twice really pisses me off. More than likely I will be contacting them demanding a full refund. I'm glad you have had no problems with your setup but from my experience I will not be dealing with them again.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
