Hey guys almost done my 5speed swap and I cannot find any thread that says what wires go where for the interior
if I could get pointed in the right direction that would be awesome thanks in advance
Matt
Was it an automatic car to begin with?
Yea, more details? I just finished my swap ill try to help.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
He's probably asking about the clutch safety switch.
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
guys i also need help with the clutch safety switch! i have completed everything but that in my ecotec auto to getrag swap. I have an idea of where it goes but i want to be 100%!
you need the neutral safety switch wire its a heavy gauge wire, its yellow on autos on 5spds its purple the wire gets removed from the neutral safety switch and installed on the clutch switch located on the pedal assembly
JBO since July 30, 2001
Awesome thank you! Do you know if I can just remove the shift lock from the auto? It's connected under my steering wheel and it's cable driven.
And I have two wires on my clutch switch. One yellow and one purple white that's protruding from the connector. So is it purple white to purple and yellow to yellow?
If i understand Not_a2_4 correctly, you only need to connect the yellow wire from your automatic stock harness to the purple thick gauge wire on the manual wiring harness. Pics
Auto
Manual
Thanks guys but found out I didn't need to do anything to the harnesses I just plugged the 5 speed harness into the auto harness that's on the body and she fired right up
