finished my eco swap and i not have a P1860 and when the TC is in a forward or reverse gear it stalls wether thes load on the wheels or not
haven't dug into to it too much yet anyone run into this obviously its not a eco swap problem its either my harness i think or the TC solenoid are these changable without dropin the trans
JBO since July 30, 2001
Never seen that code, but did a little searching. Seems you need to test the TC solenoid. Check the resistance of it. It might need to be replaced.
FU Tuning
tuned out to be a broken wire not allowing the singal to reach the PCM
JBO since July 30, 2001
