2.3 Flywheel - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
2.3 Flywheel
Sunday, April 11, 2010 10:06 PM
Can you put the 2.3 flywheel in the 2.4 wiht 2.4 trans as long as you use the whole works? Flywheel clutch pressure plate ect.


97cavalier

Re: 2.3 Flywheel
Monday, April 12, 2010 10:33 AM
Yes you can




Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi

LG0/LD9 for Life
Re: 2.3 Flywheel
Monday, April 12, 2010 11:52 AM
I am using a flywheel off of a W41 in my 02.



Re: 2.3 Flywheel
Wednesday, April 14, 2010 9:09 PM
ok thanks,


97cavalier
Re: 2.3 Flywheel
Tuesday, April 27, 2010 2:56 PM
whats the diff between the two flywheels (stock 2.4 and the stock 2.3)
Re: 2.3 Flywheel
Wednesday, April 28, 2010 7:05 AM
2.4 flywheel is stepped



2.3 flywheel is flat






Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi

LG0/LD9 for Life
Re: 2.3 Flywheel
Tuesday, May 04, 2010 8:54 AM
is one heavier than the other?
Re: 2.3 Flywheel
Tuesday, May 04, 2010 10:20 AM
If you are using a 2.3 Getrag flywheel it is the exact same as a 00+ 2.4 flywheel. If you have a 96-99 2.4 then I am not sure if there is a 2.3 flywheel that will match it exactly (maybe a 95 but not sure).



Re: 2.3 Flywheel
Tuesday, May 04, 2010 4:45 PM
Last time I checked, my 95 2.3 flywheel was stepped like the 2.4. Pre 95 flywheels are flat. What are the weight differences?
Re: 2.3 Flywheel
Tuesday, May 04, 2010 8:43 PM
Pre 95 and 00+ weigh the same. Not sure how much a 95-99 weighs but I assume its heavier.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search