Hey, I went to change my manual transmission fluid but the drain plug was stripped. I ordered a new plug, but was wondering how could I get the old one out?
Thanks
Turkey baster through the fill hole is pretty much your only option, without dropping the whole trans.
14.330 @ 96.37mph
He's asking how to remove the old plug dude...
Your best bet is to retap the hole and if there isn't enough metal then a Helicoil.
it sounds like he stripped the head on the bolt. zach you are a tard. u cannot tap a hole when there is a plug in there.
weld another head on to the bolt, and torque it off.
that's about the only way to do it.
Is the head rounded off? I think that's what you mean if you only bought a new plug.
You can use something like
this from sears. I've had luck with them. If it is in fact just rounded off I'd start with a vice grips, locked down tight. Should come out.
-Seth
