i cannot get the clutch line back into the trans mission and if i get it in i cant get the little clip on there! HELP!
do i put the clip in than force the clutch line in the slave or do i put the line in than put the clip on?
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
You put the line in, then put the clip on.
I had the same problem on my 00 Z24, and I still can't get it in. I jerry-rigged it and put half the pin in on the top, and put a spare pin on the bottom. I tried this with 2 different slave quick connects, I got it once, but never again after that...
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
damn i dont have another clip.... what else has worked for others? does the VUE trans have a smaller slave input? i dont see why it would but still....
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
