Hi Guys
I need to know if anybody can post me a picture of the 3rd gen half-shaft axle from a 2.4 please Thanks.
I will if you stop posting wrong information about clusters
You want a 5 speed or an automatic?
and also I need to know how many teeth is on the axle.
John Lenko wrote:You want a 5 speed or an automatic?
And which side? Driver's or passenger?
its going to be for the right hand with the 5 sp
You may want to clarify Driver's or Passanger's side. I had issues in trying to order axles. I tell them "Driver's side." They order "Left." I receive "Passenger's Side."
its for the passenger side
when i did my 2.4l 2001 getrag swap, the axles were IDENTICAL to my 95 izuzu axles. Don't suggest using them. but they look the same.
Nate
Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft
I know the driver's side Getrag axle is a different length than the Izuzu. I just cant remember which one is longer.
275hp & 306tq - 1999 2.2 ohv
13.2 @ 108 mph
-1996 2.4 liter + Turbo + Built motor + Torco + More boost = Lots o' Power
-2000 Mustang GT + 2004 Cobra motor, Whipple 2.3 supercharger,
built rear-end,Dodge Viper spec T56 6 speed, bolt-ons = wheelies at the track!!!!!
ok I know the 95 with the 2.3 w/5 sp had the 2 piece drive shaft on it for the passenger side
If you want to use the Jack Shafts from the NVG T550 the driver's side is just a tad too short to use so you' have to go stock. The pass side slides right in, jack shaft and all.
-Chris-
-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Correction, if you want to use the AXLES....
-Chris-
-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
i want to use the axles and the half shaft
ok i see Nobody haves pics of what im looking for at all
Sorry, I forgot completely
Here's the 00-05 Getrag axles...
these are with ABS... thus the reluctor rings on the back side of the hub. Top is the passenger side, bottom is the driver side.
Side note: Axles with ABS reluctor rings CAN be used in non ABS cars, just make sure the brake line is nowhere near those teeth or things could get REAL ugly real quick
Freakin morons.... When will they learn. Hold On Not Done Accelerating
does anybody got pictures of the half shaft or aka jack shaft
That's all there is for the 02+ Getrags/Eco combos I know that. Looks to be the same ones as those actually...
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Yup, all the Getrag axles look like that. Even 2.2L's and Eco's...
But he's looking for a pic of the two-piece intermediate axle from the 95.... I think they were used up til 97?
Check on advance autoparts or autozone's websites, they have rather accurate pics of their parts
Freakin morons.... When will they learn. Hold On Not Done Accelerating
John Lenko wrote:Yup, all the Getrag axles look like that. Even 2.2L's and Eco's...
But he's looking for a pic of the two-piece intermediate axle from the 95.... I think they were used up til 97?
yes john your correct about the two piece intermediate axle that is what im looking for
