Yes, I read the FAQ on it.
Yes, I followed the instuctions, both on here and on the directions.
Yes, I tryed it with the wires at the firewall.
Yes, I used a tester to find the ones with the lowest resistance.
Yes, I used the light blue with white stripe and red with the thick black stripe.
Yes, I have no check engine light.
No, I cant tell if its working.
No, it shifts just the same.
Please help me...whats wrong here!
faulty unit or you just didnt install it right, its not all that hard to install, the instructions that come with the unit have a picture of the GM connector with the correct wires already pointed out....
so if the wires are right, then the unit is faulty.
_______________________
** Flat Broke Racing Inc.**
There are 2 red/black wires that look almost the same, this is one of the most common errors. Double check this
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Don't use the cheap connectors they include in the package to "tap" the wires. The wires need to connect and sometimes they dont work. You may want to solder them.
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Actually, before you solder I'd make sure that you have the correct red/black wire hooked up with the supplied connectors and that the unit is infact in working order(however you'd do that). I had mine working fine with the connectors for a year before I decided to solder. Just thought I'd throw that out there before you soldered it all together. Good luck and let us know how it turns out!
lol yeah youll def notice a diffrence in the shifts i had to have my mom help me cuz im bad with colors (my forking eyes) and shes got little hands
