I can't find it but if you do a getrag swap you can use a 95-99 Clutch and FLywheel. But you would still have to use the 2000 TOB etc... with the swap.
2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time
Everywhere I look, there's a different part number for the Isuzu clutch compared to the Getrag clutch.
I would assume that you can't use the Isuzu flywheel and clutch on a Getrag. Otherwise there would only be the need for one part number.
Yes, you can, but you have to use both, you can't use an isuzu flywheel with a getrag clutch, or vice versa. The only real difference between the two is the shape of the surface of the flywheel, one is stepped, the other is flat.
Personally I'd just use the ones meant for the transmission...
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
Alright then, I stand corrected
Thanks Shifted!
I am using 2.3 flywheel and clutch ( same as 00-02 LD9 ) with the Isuzu TOB. No issues so far
Jason
99 Z24
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
