Ok some of you know I been doing the 2200 automatic 2002 cavalier and theecotec 5 speed swap out of a 2003
my car is the 2003 and im trying to make it manual
everything is in but i was told the bcm are the same
the car isn't turning on it's like knocking and not turning over
do i have to use the 2003 wires
because i was told there the same in the 02 and 03 but does it matter that my car was automatic
Daniel Alonzo wrote:Ok some of you know I been doing the 2200 automatic 2002 cavalier and theecotec 5 speed swap out of a 2003
my car is the 2003 and im trying to make it manual
everything is in but i was told the bcm are the same
the car isn't turning on it's like knocking and not turning over
do i have to use the 2003 wires
because i was told there the same in the 02 and 03 but does it matter that my car was automatic
You need to be more clear. What wires. You should have taking the motor, tranny, engine bay wiring, ECU, and BCM and put it in your car.
FU Tuning
i got the car started but it wouldn't turn on with the ecotec computer very weird
it only turned on with the automatic computer
but it drives
any one know why this is
John Higgins wrote:NJHK (That Black Guy) wrote:Read this thread:
http://www.j-body.org/forums/read.php?f=41&i=19987&t=19987#19987
That does not answer his question.
Would it turn over and shut off? The theft lock has to relearn.
My bad...it was early in the morning when I was checking out this thread.
www.kronosperformance.com / 732-742-8837
the car drives fine
im still using the automatic computer
imma put some pics up soon
way quicker then 2200 automatic
How much did it cost you for all the parts?
