who is interested in some manifolds? i am going to start producing manifolds for j's i know ccfab makes some now.
i just want to see if there is interest and if i should move into doing j's instead of Honda's
sponsorship available
depends on cost...
and expect to hear from ccfab
"I can beat that price and mine won't break"
one day he will remove the cock from his ass....
I don't care who you are you dont come into a market and act all high and mighty that is what pisses people off..
sorry i digress
but anyway yeah it really depends on cost and the materials used I guess, do you have any pictures of your work?
LE61T PTE6262 Powered 
I am on the market for another now. Let me know some prices and pictures. I have a 01 2.4L also.
~Boost. Its what's for dinner!~
QBE (73H 800573D 0N3) wrote:depends on cost...
and expect to hear from ccfab
"I can beat that price and mine won't break"
one day he will remove the cock from his ass....
I don't care who you are you dont come into a market and act all high and mighty that is what pisses people off..
sorry i digress
but anyway yeah it really depends on cost and the materials used I guess, do you have any pictures of your work?
i do not have any pics of my manifolds i keep forgetting my cam at the g/f's house. all my manifolds are Mild Steel i dont like SS and the flanges are Laser cut out of 3/8"
QBE i do expect to hear s comment like that. he can try and beat my price but i dont think he will. i am not in this for the money, i am not asking the org if they want manifolds so i can jack the price up and walk away with $135 like someone that will be nameless
my price will come when i see where i can get the cavalier flanges from
sponsorship available
nameless
HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED
Victor @streetlineconcepts.com wrote:QBE (73H 800573D 0N3) wrote:depends on cost...
and expect to hear from ccfab
"I can beat that price and mine won't break"
one day he will remove the cock from his ass....
I don't care who you are you dont come into a market and act all high and mighty that is what pisses people off..
sorry i digress
but anyway yeah it really depends on cost and the materials used I guess, do you have any pictures of your work?
i do not have any pics of my manifolds i keep forgetting my cam at the g/f's house. all my manifolds are Mild Steel i dont like SS and the flanges are Laser cut out of 3/8"
QBE i do expect to hear s comment like that. he can try and beat my price but i dont think he will. i am not in this for the money, i am not asking the org if they want manifolds so i can jack the price up and walk away with $135 like someone that will be nameless
my price will come when i see where i can get the cavalier flanges from
Uh. whats wrong with stainless steel?
Blew it up
guys , the funny part it i talk to victor on aim almost daily now, and he keeps harassing me to tell him where i get my material and also what he should use, because he doesnt even know.
as far as beating my price, go for it. youll have to cut some sort of corner to do so, whether it be using mild steel, unthreaded flanges whatever.
nowhere did i ever say im " the @!#$" as some of you think i do, im just here to offer a good quality cost effective solution for your thin aftermarket support.
as far as making 135 a log, thats not even close to accurate. profit on my log is less than 100 dollars. if i charged any less it wouldnt be worth my time. victor wanted to carry my manifolds but then decided he wants to compete, thats fine, my quality and quick turnaround time speak for themselves,.
what victor seems to be aiming for here is a equivilent to the ones you see on ebay made from laser cut flanges 1 1/4 mild steel and unthreaded steel flanges. and i believe mig welded??
all my flanges now are cnc cut and threaded. and i use stainless steel. all which are more expensive.
more options to the j body market shows people are now considering these cars valid platforms, and the good @!#$ will come.
so victor, theres no reason to poke at me, or others, bust out some pro\duct and let it speak for itself.
ccfab wrote:
nowhere did i ever say im " the @!#$" as some of you think i do, im just here to offer a good quality cost effective solution for your thin aftermarket support.
Actions speak louder then words
LE61T PTE6262 Powered
also victor, being a shop with bills to pay, and using material/time and shop resources, how can you "not be in t for the money" i am passionate about what i do and i love fabwork, but if it doesnt pay the bills, your sol.
ccfab wrote:guys , the funny part it i talk to victor on aim almost daily now, and he keeps harassing me to tell him where i get my material and also what he should use, because he doesnt even know.
as far as beating my price, go for it. youll have to cut some sort of corner to do so, whether it be using mild steel, unthreaded flanges whatever.
nowhere did i ever say im " the @!#$" as some of you think i do, im just here to offer a good quality cost effective solution for your thin aftermarket support.
i messaged you two times i think to see if you knew anyone who was cheaper to get pipes from i didn't desied to compete i have always made manifolds i only sold them locally and to friends, i asked if you wanted to supply me with since i didn't have time to make them and im not ameing to sell ebay qualty products how do you figure ill cut corners? i buy pips and flanges in bulk makeing each pipe around $5 canadian and
my manifold will be produced before the end of the month, probily will come coated for free aswell
so choose who you want
Victor @streetlineconcepts.com wrote:ccfab wrote:guys , the funny part it i talk to victor on aim almost daily now, and he keeps harassing me to tell him where i get my material and also what he should use, because he doesnt even know.
as far as beating my price, go for it. youll have to cut some sort of corner to do so, whether it be using mild steel, unthreaded flanges whatever.
nowhere did i ever say im " the @!#$" as some of you think i do, im just here to offer a good quality cost effective solution for your thin aftermarket support.
i messaged you two times i think to see if you knew anyone who was cheaper to get pipes from i didn't desied to compete i have always made manifolds i only sold them locally and to friends, i asked if you wanted to supply me with since i didn't have time to make them and im not ameing to sell ebay qualty products how do you figure ill cut corners? i buy pips and flanges in bulk makeing each pipe around $5 canadian and
my manifold will be produced before the end of the month, probily will come coated for free aswell
so choose who you want
It is no secret where to get the parts from for Victor or anyone else wanting to make one.
Just go to www.mcmastercar.com
Search for 1.5" schedule 40 pipe
you will need (2) 90 degree bends and (2) "T"s both are less than 30 bucks!
Flanges can be found on www.JGSTOOL.com <---offers discounts on large orders Victor.
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
I designed the ebay manifold, and lots of people use them with good success, I have used two on different engines, if you are going to flame, get the f$%k off the site. Whats wrong with compition? keeps things healthy..
I love flames I was jk, lets keep this rollin'
HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED
and josh your best bet is to put your tail between your legs and leave, just to warn you ALOT of people are messageing me.
there is no place on this site for attatude like yours if you want to find out what this site can do ask around who rick is
I still like the CNFX one the best!
ccfab wrote:also victor, being a shop with bills to pay, and using material/time and shop resources, how can you "not be in t for the money" i am passionate about what i do and i love fabwork, but if it doesnt pay the bills, your sol.
why cant you understand this i am in a building my dad/me owns that his/mine construction company is also in so which means "streetline concepts" has VARY low overhead but i guess welding in your garage lets the fums get to your head
sorry phil i forgot about that
I'm only going to say this once, and this is directed at CCFab and Victor, other members also take warning:
If you want to conduct business on this site, DO IT IN A PROFESSIONAL MANNER. Do you see Jason or Karo out here bad mouthing each other? NO. If you want to make a product and compete, DO IT. Tearing down each others methods and business is NOT tolerated and WILL result in bans if not worse. This does NOTHING for your business and does NOTHING for you as a member.
Keep it professional, or keep it off this site.
To contact a moderator, please send a direct message to the moderator account. Please
note you must be logged in to send messages to this account.
Please include a link if you are contacting us regarding a thread.
DO NOT SEND PRIVATE MESSAGES TO THIS ACCOUNT, USE THE LINK ABOVE.
